• Out-of-Stock
F3K AURI Wing2Part Green Honeycomb
  • F3K AURI Wing2Part Green Honeycomb
  • F3K AURI Wing2Part Green Honeycomb
  • F3K AURI Wing2Part Green Honeycomb

F3K AURI Wing2Part Green Honeycomb

Beautiful hand-launched F3K Auri high quality, fully molded carbon, painted decoration in the mold.
Offered here in version two-part wings (carbon textreme)

Read more
€649.00
Quantity :
Out-of-Stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

The Auri is ideal for customers looking for exceptional flight performance and model ruggedness at a reasonable cost. The fuselage is a one-piece design with a generous front end facilitating the installation of four servos in the pod, eliminating the need for a centerline lead. The tailplane (horizontal stabilizer) and vertical stabilizer (vertical stabilizer) are very light and have a nice finish. The rudder and elevator are ready to be hinged.

The wing is beautifully molded in carbon with a Rohacell core to maximize strength and dimensional stability while ensuring a smooth surface finish. The design incorporates well engineered fins to give excellent control at all speeds. The space between the hinges is sealed with hinge tape, eliminating a common source of drag and ensuring high launches.

Accessories include servo plate, stab bracket, aileron controls, rudder and elevator cables, torsion springs, all horns and a nice asymmetrical carbon peg.

Made in Russia.

The model is of a very high standard of workmanship and finish. The quality of the parts is excellent. The cut and finish are superb. You have to see the glider to really appreciate the beauty and shine of the surfaces.

The model is entirely molded in carbon. The fuselage is a very nice design with a nice sized front pod for easy insertion of the 4 servos and receiver.

The wing is beautifully molded in expanded carbon with a solid center construction and a very good surface finish.
The accessory bag is very complete and contains the very solid launch peg, all horns, springs/caps for the tailplanes, a control cable and two servo plates, for four KST X08 or four MKS DS75K or HV75K servos.
It is also possible to install Blue Bird BMS 101 servos

Several pictures of the assembly are on the following RC Group thread: https://www.rcgroups.com/forums/showthread.php?3127216-Auri/page2

Specifications

Wingspan: 1.5 m
Wing area: 20.0 dm2
Length: 105 cm
Mass in flight order: from 218 g (Light version)
Wing loading: 11.0 g / dm2
Aspect ratio: 11.2
Aerodynamic profile: LD series
Dihedral: 6.0º
Center of gravity: 63 to 64 mm from the leading edge of the wing
Controls: Drift, Depth, Ailerons

Measurement of the weights


Fuselage + stab support : 41.5 gr
Stab : 5.6 gr
Drift : 6.0 gr
Peg : 3.2 gr
Servos plate : 6.3gr
Miscellaneous : 5.0 gr

278-AURI-Wing2Part-Green-Honeycomb
  • Type of aircraft kit : Kit to equip
  • Material : Fiber / Composite