• Out-of-Stock
NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech
  • NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech
  • NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech
  • NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech
  • NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech
  • NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech
  • NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech
  • NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech
  • NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech

NXT EP 2.0 XTREM 6S brushless 1/8 4wd RTR Hobbytech

New version of the NXT EP, this XTREM version is an optimization of the vehicle thanks to the new reinforced parts will allow you to use this vehicle on even more "Xtrem" grounds !NEW XTREM VERSION : New steel cardan shafts with original reinforcement New 5mm front shock absorber support CNCLe spirit NXT EP is a 4WD TT 1/8th Brushless RTR buggy "Ready to roll" designed and developed in France, manufactured on the latest platform of HOBBYTECH competition buggies, equipped with an economical and ecological propulsion capable of an extraordinary power to bring you a maximum of pleasure and thrills. All the experience and the know-how of the Hobbytech team are gathered on this model capable of going from a leisure practice to the pure competition race. The new "ball" front drive train is one of the most remarkable and rare novelties on an RTR model. This model is delivered 100% assembled with remote control, without battery lipo 4-6S and without charger. 4S sprockets of 15d and loop Deans in OPTION required.
Read more
€489.90
Quantity :
Out-of-Stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

General characteristics

  • Pitbull type bodywork
  • New triangulation system
  • 150Amp KONECT controller "by HOBBYWING
  • KONECT 4-pole brushless motor size 4274 2000Kv
  • KONECT KT2S 2,4-GHz radio
  • KONECT 17KG .14S waterproof steering servo
  • 46-tooth steel center gear
  • 13 / 43 tooth steel bevel gear and drive pinion
  • CVD front drive shafts
  • Fully mounted on reverse linkage and ball bearings (24pcs)
  • ROCKET" racing tires mounted and glued on stick rims
  • Front and rear hydraulic shock absorbers made entirely of aluminum
  • Painted and decorated bodywork "by BittyDesign
  • For 4S use 15d sprockets and Deans loop OPTIONAL required.

Technical specifications

  • Height / Max height. : 205 mm
  • Wheelbase / Empattement : 325 mm
  • Front Width / Voie (avant) : 304 mm
  • Rear Width / Voie (arrière) maxi. : 308 mm
  • Front ride height : 55 mm
  • Rear ride height : 66 mm
  • Weight / Poids total : 3450 gr

Not included :

  • Li-Po charger
  • Li-Po battery 6S / 2x3S (possible 4S/2x2S with optional pinion)
191-1.NXT.EP-XTREM
  • Vehicle scale : 1/8
  • Motorization of the vehicle : brushless
  • Vehicle kit type : RTR (Ready to Run)