OMPHobby PNP Edge 540 Orange approx 1.52m 60' Aircraft

OMPHOBBY presents the Edge 540 60 "in a Carbon/Kevlar-reinforced balsa version, coated with Oracover, highly durable and brightly colored. The Edge 540 is a 3D BEAST. This plane will do everything you want and more.
If you don't like 3D flying, don't be afraid, this plane also flies well as an Aresti-style aerobatic plane.

It can be fitted with a brushless motor from 1200 to 1600W and a 6S LiPo battery. The extremely light fuselage is made of balsa/plywood reinforced with Kevlar®/carbon composite, with numerous carbon parts, a removable fiberglass cowling and a large canopy providing perfect, easy access to the entire power system and RC equipment. The motor is mounted on a reinforced plywood/composite housing using a radial support.

The two-part wing is made entirely of balsa with a symmetrical aerodynamic profile and a carbon wing key, the wing halves are fixed with screws to the fuselage. The large ailerons are each controlled by a single servo. You can install the SFG winglets supplied on the wingtips.

The tailplane is made entirely of lightweight balsa, and the "horizontal" tailplane is one-piece, glued into the fuselage. The elevator and vertical stabilizer are controlled by servos installed in the aft fuselage.

The main gear is carbon, with fiberglass fairings, lightweight wheels and the tailwheel with carbon support is coupled to the vertical stabilizer.

Recommended parameters for double rates and control surface exponentials: Travel EXPO Direction Value
Aileron High 35~40% Up 36~39°
Low 40~45% Down 20~26°
Depth High 38~45% Up 45~53°
Low 45~55% Down 30~35°
Drift High 38~45% Up 42~50°
Low 45~55% Down 28~32°

Features :

Color: ORANGE
Motorization: EP
Wingspan: 1524mm
Length: 1500mm
Wing area: 42.32dm²
Wing loading: 66gr/dm²
Center of Gravity: 86-95mm
Weight: ~2,75 - 2,85kg

Kit contents:

ARF kit in balsa reinforced with Oracover Kevlar canvas
A cowling, wheel fairings in painted fibreglass
A carbon main gear
A tail wheel
The wheels
Accessories.