• New
Spektrum AR20410T DSMX 20-channel PowerSafe receiver, Telemetry
  • Spektrum AR20410T DSMX 20-channel PowerSafe receiver, Telemetry
  • Spektrum AR20410T DSMX 20-channel PowerSafe receiver, Telemetry

Spektrum AR20410T DSMX 20-channel PowerSafe receiver, Telemetry

Spektrum AR20410T - Introducing the 20-channel PowerSafe telemetry receiver.

The Spektrum™ AR20410T PowerSafe™ receiver is a feature-rich 20-channel receiver with full-range telemetry. Spektrum PowerSafe receivers are designed for models using many servos and accessories that draw a lot of current, such as those found on giant aircraft and jet models. They feature a robust power "bus" designed to handle high-current loads, as well as two 13 AWG battery input cables with IC3™ connectors for use with larger battery packs. This enables high-current systems to be supported directly via the receiver without the need for a separate power distribution system. Now available with innovative features such as fast start-up recovery, support for regenerative servos, remote standby mode and compatibility with the all-new Synapse. AS3X+ and SAFE module.

If you have a DSMX®/DSM2® transmitter capable of 11 ms frame rates, the AR20410T will offer ultra-fast input-output response, perfect for high-performance applications such as aggressive 3D, IMAC and turbine aircraft. Each receiver includes 4 SRXL2 remote receivers that take full advantage of Spektrum MultiLink™ technology. This patented technology eliminates reflected signal attenuation and antenna blind spots that can affect all 2.4 GHz systems, helping to ensure a solid connection between you and your aircraft. As an added safety measure, Spektrum has designed the AR20410T receiver with an exclusive software switch. Allowing the servo current to be routed around the switch, so if the switch fails for any reason, system power will not be interrupted.

A revolutionary feature of the PowerSafe AR20410T receiver is the integrated receiver battery energy sensors. Giving pilots a better understanding of the charge and mAh used by servos, retractables, lights, etc., and used by each battery.

Combined with the new Spektrum AR20410T PowerSafe receiver, it's an incredible combination of advanced stabilization and state-of-the-art electronics.

Read more
€449.90
Quantity :
Last items in stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Spektrum AR20410T 20-channel PowerSafe telemetry receiver features

  • Compatible with Synapse AS3X+ / SAFE flight stabilization module (SPMAS6000, available separately).
  • Patented PowerSafe™ redundancy system with two battery input ports with IC3 connectors. Perfect for power-hungry aircraft and high-current servomotor applications consuming up to 35A (maximum burst of 50A)
  • Innovative power management system designed with a standby mode allowing pilots to remotely switch on/off from the transmitter
  • Quick-start recovery technology enables the gyro system to be restarted in flight in the event of electrostatic discharge or power failure, giving the pilot control in milliseconds using a stored stabilization calibration
  • Regenerative servo support for any number of servos
  • Advanced programming for easy adjustments to safety parameters, servo frame rate settings, AS3X+ parameters, and much more
  • USB-C port for easy product registration and firmware updates
  • 12V compatible for use with 12V servo applications (must be activated via advanced programming)
  • Integrated battery capacity monitor automatically reports flight battery capacity and can automatically reset when fully charged batteries are installed
  • Integrated Black Box telemetry log automatically records all telemetry data when a Micro SD card is installed (Micro SD card not included)
  • Integrated status LED provides useful information at start-up, including warnings and mode indicators
  • SRXL2 connectivity for easy one-wire connection to supported devices
  • Ready to use with Spektrum Smart ESC for single-wire telemetry data without the need for additional modules or links
  • Receiver block energy, voltage sensor and flight log telemetry data available without the need for additional sensors
  • Telemetry data on temperature, imbalance, cycles and cell voltage available when using Smart batteries
  • Use of SPM4651T remote receiver, provides full range telemetry with integrated barometer giving: altitude and vario telemetry without additional modules
  • The included momentary push-button starts or stops the system. However, shutting down the system requires a specific prolonged press pattern to avoid accidental shutdowns in the event of failure or disconnection of the button. The switch itself does not need to be replaced. In addition, there is a power switch on the receiver itself which can be used instead.
  • Rigid rubber grommet mounts and minimalist labeling allow for very clean configurations of your models
  • Capable of high-speed frame rates of 11 ms. This can be increased to 5.5 ms, if supported by the servo, for improved stabilization when using Synapse
  • Linking is easier than ever, with four options for initiating the linking process
  • Integrated telemetry with built-in ports for rpm, flight pack voltage, temperature sensors and X-bus for telemetry sensor expansion
  • Compatible with all Spektrum DSMX transmitters
  • Not compatible with DSM2 AIRMOD JR module (SPMMSJR720)

NEXT GENERATION IN FLIGHT STABILIZATION for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver

NEW-GENERATION FLIGHT STABILIZATION

The AR20410T is compatible with the Synapse AS3X+/SAFE stabilizer module (not included), offering enhanced stability and control for your aircraft. The all-new AS3X+ features a vastly improved stabilization algorithm that has been rigorously tested by industry experts. The system is even easier to tune, and can be easily optimized for any type of aircraft you fly. Never again spend hours tweaking and fine-tuning until your aircraft is "locked in". We were able to configure most aircraft in less than 5 minutes, including the first flight setup.

Key AS3X+ enhancements include:

  • Stop Lock and Release Rate parameters
  • Heading Hold improvements
  • Improved gyro filtering
  • Canard and thrust vectoring support

PATENTED POWERSAFE™ REDUNDANCY SYSTEM for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver

PATENTED POWERSAFE™ REDUNDANCY SYSTEM

The Spektrum™ AR20410T is the ultimate solution for powering power-hungry radio systems. In aircraft with multiple current-intensive servos (such as giant-scale aircraft, jets, etc.), PowerSafe redundancy expertly manages power between the two connected receiver batteries with true dual-battery redundancy. Each battery is isolated, and if one should fail/short-circuit, the other will seamlessly take over.

INNOVATIVE BATTERY CAPACITY MONITOR for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver

INNOVATIVE BATTERY CAPACITY MONITOR

PowerSafe receivers feature dual battery capacity monitoring via telemetry when used with Spektrum AirWare transmitters. Activate the Auto Config function on your transmitter's telemetry page to display the capacity consumed by the receiver. The capacity used is stored flight by flight and is added until reset. Capacity can be automatically reset when the battery is charged, allowing easy monitoring of battery capacity.

SLEEP MODE  for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver

STANDBY MODE

The AR20410T receiver features an advanced power management system designed with a sleep mode allowing pilots to remotely switch the transmitter on/off. This exciting new feature lets you power up your model's electronics at the touch of a button. No hatch manipulation or physical switches are required, and it's extremely convenient for a day in the field.

INTEGRATED BLACK BOX TELEMETRY LOGGING for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver

INTEGRATED "BLACK BOX" TELEMETRY RECORDING

When a Micro SD card is inserted in the receiver, during operation, flight information will be recorded in a file on the card, including flight log data, battery status and other telemetry data stored over time. If not deleted, older recorded data logs will be deleted, retaining the most recent logs. This can be a handy tool for examining flight data over time, which can be useful for performance diagnostics.

FORWARD PROGRAMMABLE for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver

ADVANCED PROGRAMMING

You can configure the AR20410T wireless receiver, directly from any compatible Spektrum transmitter, via the advanced programming menu. No separate computer or mobile device is required for configuration and settings.

INTEGRATED BAROMETER for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver

INTEGRATED BAROMETER

The Spektrum AR20410T receiver features a built-in barometer (integrated pressure sensor) to provide altitude and vario telemetry data without the need to purchase additional sensor modules.

MICRO USB PORT for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver

MICRO-USB PORT

A user-friendly micro USB port is integrated into the receiver for easy access to firmware updates via the Spektrum PC Programmer application.

EXPANSIVE TELEMETRY OPTIONS for the Spektrum AR20410T 20-Channel PowerSafe Telemetry Receiver
NUMEROUS TELEMETRY OPTIONS AVAILABLE

In addition to the built-in telemetry sensors, the AR20410T supports a long list of Spektrum telemetry sensors and third-party telemetry accessories. Easily add powerful telemetry data tools to your model, such as GPS, speed sensors, engine speed and turbine ECU telemetry from supported jet turbine controllers.

Product Specifications

Application Air
Band 2.4GHz
Bind Method Bind Button, Bind Plug
Channels 20
Failsafe Yes
Input Voltage 4V-12.6V
Modulation DSMX / DSM2
Data port Yes
Product Height 0.75" (19 mm)
Product Length 2.4" (61 mm)
Product Width 2.72" (69 mm)
Programmable Yes
Range Full
Resolution 2048
Serial Out SRXL2
Technology AS3X+
Telemetry Yes
XPlus Compatible Yes
110-SPMAR20410T