• Out-of-Stock
X-green vtol BNF Basic
  • X-green vtol BNF Basic
  • X-green vtol BNF Basic
  • X-green vtol BNF Basic
  • X-green vtol BNF Basic
  • X-green vtol BNF Basic
  • X-green vtol BNF Basic
  • X-green vtol BNF Basic
  • X-green vtol BNF Basic

X-green vtol BNF Basic

The X-green VTol from E-flite is a revolutionary flying wing allowing a vertical takeoff and landing.this fun and easy to handle wing will allow you thanks to 3 flight modes to be used: In multirotor mode, you will fly vertically as with a classic multirotor In stabilized aircraft mode, you will fly in a classic way with this flying wing and you can use the SAFE mode in case of worries In acro mode, you will get a flying wing completely unrestrained, without assistance, ideal to perform aerobatics. It will even be possible to perform FPV by adding a small camera in the slot provided for this purpose.BNF Basic version. Sold with its receiver. Requires a radio, a battery, a charger.sold with several decorations.
Read more
€41.66
Quantity :
Out-of-Stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Technical characteristics

  • Span: 504mm
  • Length : 264mm
  • Weight in flight: 180-200g
  • Motors: Outrunner Brushless 2600kv 280
  • Receiver: DSMX ASX3 and SAFE
  • Recommended battery: Lipo 2S 7.4V 450 to 800 mAh
  • 2x Servos 4g
  • Estimated assembly time: 10 minutes

Elements needed to fly

  • Spektrum 6 channel radio
  • 1x Lipo 2S 7.4V 450 to 800 mAh battery
  • 1x Lipo charger
110-EFL1850
  • Span in meters : 0,50
  • Material : Foam / EPP / Elapor