Beautiful hand-launched NRJ full carbon glider with a 1.5m wingspan (CW60 wing layup - strong carbon), built by Anton Ovcharenko from OA composites to a very high standard. The quality of the parts is excellent. You have to see the glider to really appreciate the beauty and the shine of the surfaces.the aerodynamics has been studied by Christophe Bourdon.this standard layup allows the NRJ to be ballasted up to 100gr.typical weight of the wing in CW60 : 96 to 105 gr.The NRJ kit includes these accessories: 3D printed servo support for 4 X08 servos, launch peg, all the horns and linkages, wire for the tail springs, pull wire and crimps, screws for the wings and the stab.
Help us to offer you the best price on the product "F3K NRJ Strong CW60 honeycomb - 1.5m"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
Wingspan : 1.5m Length : 0.96m Wing area : 19 dm² Wing loading : 10.4 gr/dm² Dihedral : 7° Profile : NRJ series Center of gravity : 64 to 66.5mm from BA to root
Suggested settings
Drift: 12 mm on each side Depth: 8 mm up / 8 mm down Ailerons: 13 mm up / 19 mm down
Recommended snap flap: Max depth nose up -> 5 mm low ailerons Max depth nose down -> 3 mm high ailerons
Recommended flight phases: Launch: 1 mm ailerons up & 2.5 mm ailerons up Speed: 1.5 mm ailerons up Cruise: 0 mm ailerons in neutral Slow cruise: 2 mm ailerons down Thermal: 6 mm ailerons down Landing: ailerons down as much as possible
Beautiful hand-launched NRJ full carbon glider with a 1.5m wingspan (CW60 wing layup - strong carbon), built by Anton Ovcharenko from OA composites to a very high standard. The quality of the parts is excellent. You have to see the glider to really appreciate the beauty and the shine of the surfaces.the aerodynamics has been studied by Christophe Bourdon.this standard layup allows the NRJ to be ballasted up to 100gr.typical weight of the wing in CW60 : 96 to 105 gr.The NRJ kit includes these accessories: 3D printed servo support for 4 X08 servos, launch peg, all the horns and linkages, wire for the tail springs, pull wire and crimps, screws for the wings and the stab.
Paiement sécurisé
Livraison 24/48h
Paiement 3X
