• Out-of-Stock
Flip approx. 2.00m ARF TOPModel CZ
  • Flip approx. 2.00m ARF TOPModel CZ
  • Flip approx. 2.00m ARF TOPModel CZ

Flip approx. 2.00m ARF TOPModel CZ

The Flip is delivered as an electric glider for sport and competition flying. The parts for the electrification are provided in the kit, including the preparation for cutting the front of the fuselage.

Flip is designed for sport and aerobatic flight on a slope or on a flat surface. You can fly on the flat as a glider or with the electrified version as well. The start is possible by using the towing, or the aero-towing (you have to install the tow hook).

The motorization is designed for a capacity of 3S Li-Po 2 - 4Ah. The Flip is a skillful glider that responds easily to control commands. Due to the large surface area of the body side handles and maneuvers such as the roller on the time and the knife years. Even when thermal flying gives a surprisingly good performance.

Downloadable instructions below:

Read more
Quantity :

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?
Technical specification:


1350 mm

1,8-2,1 kg

40,2 dm2




Included in the kit:

  • Fiberglass fuselage in glider version with carbon reinforcement and fiberglass canopy
  • Wing in two parts made of foam-balsa
  • The elevator is made of a balsa frame with carbon spar and leading edges.
  • The rudder is made from a balsa wood frame
  • All covered with Oracover®.
  • Cutting template for the fuselage nose
  • High quality accessories (servo covers, servo mounts, rods, fasteners, control horns, carbon wing seal, flap tape, fiberglass motor mount,...)
  • Decal sheet
  • Complete assembly manual with step by step illustrations
  • Span in meters : 2,00
  • Type of aircraft kit : Kit to equip
  • Material : Wood