038-0131677
The brushless motors of the series AC 16/... have efficiencies up to 88%.
identical in dimensions to the 400 class motors.
these motors can be used either directly, with a gearbox or in an electric turbine.
kevlar is used to wrap the rotor and holds the magnets up to a speed of more than 35000rpm.
the rotor uses a hardened steel shaft with a diameter of 3,17mm and is supported by two high quality ball bearings
.MEGA Acn 16/7/7
Technical Specifications:
- >Recommended number of cells: 2 LiPo
- No. of rpm per volt: 2450 rpm x V
- MAXI power consumption: 9A
- Internal resistance: 94mOhm
- Maximum Ø: 28,0mm
- Maximum length: 29,0mm
- Ø of motor shaft: 3.17mm
- Weight: 48g
- Recommended propellers: 5x2-6x3"
Recommended controller: XPower XREG 10
Tips: This is a recommended motor for very fast models up to 500g (direct drive, 7x5-8x4 propeller) or for use with the MEGA MICROGEAR gearbox on small 3D models (10x6 propeller). Recommended battery 6-8 cells NiCd-NiMh or 2 LiPo.
038-0131677
You will also like