MEGA RC 400/7/12 ENGINE

MEGA RC400 series: This series of motors exists in 2 different lengths. They are specially designed for use in direct drives. The brushless motors with Neodym magnets and rotating cage produce a high torque, allowing to "turn" large diameter propellers with important pitches. The motor shaft is made of treated steel, and is supported by 2 ball bearings. These motors can be powered by NiCd, NiMh or LiPo batteries. Use of the motors RC 400/7/..: Aircraft up to 0.5kg take-off weight - Gliders up to 0.7kg take-off weight - All types of ParkFlyers - 3D aircraft up to 0.35kg take-off weight Use of RC 400/15/..: -Aircraft up to 0.8kg takeoff weight -Gliders up to 1.0kg takeoff weight -Larger ParkFlyers -3D aircraft up to 0.5kg takeoff weight Recommended controller: REG 18 XPOWER MEGA RC 400/7/12 Recommended number of cells: 6 to 8 or 2 LiPo No. of rpm per volt rpm x v: 1115 MAXI A consumption: 10 Resistance 1 phase mOhm: 119 Maximum Ø mm: 28,0 Maximum length mm: 29,5 Ø of motor shaft mm: 3,17 Weight g: 39 Recommended propeller Direct Drive: 8x4-10x4,7" Measurements: Propeller: APC sf 10x4.7 Speed: 5100rpm Power Consumption: 8A Battery: Hot-Lips 360 2S1P Pull: 450g Controller: REG 18 XPOWER TIMING HARD Measurements: Propeller: APC SF 10X4.7 Speed: 6000t/mn Power consumption: 11A Battery: Hot-Lips 360 3S1P Traction: 620g Controller: REG 18 XPOWER TIMING HARD Power consumption up to 9A