MEGA RC 400/15/7 ENGINE

MEGA RC400 series: This series of motors exists in 2 different lengths. They are specially designed for use in direct drives. The brushless motors with Neodym magnets and rotating cage produce a high torque, allowing to "turn" large diameter propellers with important pitches. The motor shaft is made of treated steel and is supported by 2 ball bearings. These motors can be powered by NiCd, NiMh or LiPo batteries. Use of the motors RC 400/7/..: Aircraft up to 0.5kg take-off weight - Gliders up to 0.7kg take-off weight - All types of ParkFlyers - 3D aircraft up to 0.35kg take-off weight Use of RC 400/15/..: Aircraft up to 0.8kg take-off weight -Gliders up to 1.0kg take-off weight -Larger ParkFlyers -3D aircraft up to 0.5kg take-off weight MEGA RC 400/15/8: Recommended number of cells: 4 to 16 or 2 to 3 LiPo No. of RPM per volt RPM x v: 800 MAXI power consumption A: 12 Resistance 1 phase mOhm: 92.5 Maximum Ø mm: 28.0 Maximum length mm: 36.5 Motor shaft Ø mm: 3.2 Weight g: 63 Recommended propeller Direct Drive: 9x4.7-12x6 Power consumption up to 10A Recommended controller: Xpower REG 18 Measurements: Propeller: APC E 12X6 Controller: Xpower REG 18 Battery: Hot Lips 1300 2S1P Speed: 4800rpm Power consumption: 11.5A Traction: Measures: Propeller: APC E 9X4.5 Controller: Xpower REG 18 Battery: Hot Lips 1300 3S1P Speed: 8000t/mn Consumption: 8A Traction: