High-performance electric sport glider with a 2350 mm wingspan. Very light construction; fiberglass fuselage with carbon rear spar, balsa wing, elevator and rudder with carbon main spar and carbon leading edge. Controlled ailerons, flaps, rudder and elevator.
Help us to offer you the best price on the product "Agama 2.35m ARF TopModel CZ"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
The Agama is a lightweight, high-performance electric glider, controlled in all axes, with a classic tailplane (rudder and detachable elevator). The large wing area and the profile used give the model absolutely perfect flight characteristics in thermal conditions, even in the evening calm. At the same time, it has good wind penetration and excellent handling. The complete mechanization of the wing, in the hands of an experienced pilot, allows a wide range of settings to take advantage of all its characteristics. Landings are a delight when using the butterfly mix. The Agama features a two-part AG profile wing. The wing is attached to the fuselage by two screws, and even with the horizontal tail, it can be easily disassembled and stored for easy transport to the airport.
The precision-crafted fuselage is made of painted laminate. It is reinforced with carbon fabric, has a cut nose ready for insertion of the engine bulkhead and installation of a Ø 28mm engine with Ø 32mm cone and folding propeller. The rear of the fuselage features a tapered tail tube in carbon fabric. The carbon wing spar (made from carbon stock) and carbon hub give the wing sufficient strength and rigidity. The wing is connected by a carbon-filled aluminum connector. The elevator and rudder have a carbon main spar and leading edge, and are controlled by servos located under the wing.
The Agama will be appreciated not only by fans of competition flying, but also by all pilots who like to enjoy a fun and enjoyable flying experience.
You'll be amazed by the truly excellent flight characteristics, and you'll be looking forward to every next flight!
This model is designed and manufactured in the Czech Republic. Spare parts are in stock.
If you're interested in a color combination other than the one suggested, please contact us - we'll be happy to accommodate you.
The kit contains
Lightweight, carbon-fiber-reinforced, colored fiberglass fuselage with Ø32mm cut tip and carbon tail spar.
Blue-painted fiberglass cockpit
Two-piece balsa structural wing with carbon-tube spar and leading edge, and carbon-filled aluminum coupling covered with aluminum foil.
Balsa tail, with carbon fiber spar and leading edge, all covered with film.
Plotter-cut decals with transfer film
High-quality small accessories (engine bulkhead, servo covers and mounts, rods, rod ends, steering levers, screws, nuts, locking pins, hinges, tape for gluing ailerons and flaps, ...)
Fully illustrated assembly instructions
Recommended equipment :
Servos: 6x micro servo pro - 2x ailerons (BMS-115wv+ Blue Bird)
High-performance electric sport glider with a 2350 mm wingspan. Very light construction; fiberglass fuselage with carbon rear spar, balsa wing, elevator and rudder with carbon main spar and carbon leading edge. Controlled ailerons, flaps, rudder and elevator.
Paiement sécurisé
Livraison 24/48h
Paiement 3X
