- Out-of-Stock
The Adriana Topmodel CZ is a motorglider designed for the practice of Elektro 7. The Adriana has a sufficient wingspan for good glide and the slim wing profile contributes to improved air penetration. The wing is constructed from traditional balsa wood, covered with Oracover, with fiber winglets. It can be disassembled into two parts for transport. The fuselage is molded in fiberglass and painted.the nose, cut to 40mm, is designed to receive a motor with a 3S LiPo battery.
- Paiement sécurisé
- Livraison 24/48h
- Paiement 3X
Technical characteristics
- Span : 2060mm
- Length : 1020mm
- Weight: 900g
- Wing area: 32.6dm²
- Wing loading: 27.6g/dm²
- Airfoil : MH32
- V-tail
- RC functions : rudder, elevator, ailerons, flaps, motor
Recommended components
- 2x HS-65HB servos (V-Tail fin/ elevator)
- 2x HS65MG servos (flaps)
- 2x DS09-SMD type servos (ailerons)
- Wire for servos
- 1x XC3223/10 X-Power motor
- 1x 40mm cone
- 1x pair of 11x8" folding propellers
- 1x 60A controller
- 1x LiPo 3S 11.1V 2500-3200mAh battery
- 1x LiPo compatible charger
- 1x 6 or more channel radio control/receiver set with V-tail mix
Contents of the kit
- Wings and tailplanes made of balsa wood and covered with Oracover
- Fiberglass winglets with white gelcoat
- Molded fiberglass fuselage with gelcoat
- Accessories (horns, rods ...)
- Illustrated manual (downloadable above)
213-02060
- Span in meters : 2,06
- Type of aircraft kit : Kit to equip
- Material : Wood
You will also like