Programming card for Dualsky V2 controller

Ref: 016-PRGCARDV2

Add to my favorites Remove from my favorites

Programming board for V2 DUALSKY brushless controllers. This card will allow you to program very easily and quickly all the parameters of your controller, each setting being clearly indicated by a small LED.Programmable parameters:Brake: 2 positions (ON or OFF) Cut-Off: instantaneous or progressive Cut-off level: Low-normal-high Battery type: LiPo or NiCd/NiMh Startup: normal or soft Timing: 3 modes

€11.50

Quantity :

Stock available

Paiement sécurisé
Livraison 24/48h
Paiement 3X

Cheaper elsewhere?

Product description
Product characteristics

Use:

Connect the controller to the board (socket marked BEC)
Connect the battery to the controller
The LEDs indicate the current setting of the parameters
Press the "select" button to navigate through the parameters
Press the button twice on the parameter to be changed. Press once to move to the next parameter
In the reset position, pressing twice resets the controller to its original settings.

Note: when using an OPTO controller, it is necessary to connect a 4-cell battery (receiver type).