Radio Futaba 18SZ 2.4Ghz + R7014SB Mode 2

General Features:

- 4.3-inch HVGA Color LCD touch screen with LCD backlight. The screen is transflective, allowing both indoor and outdoor visibility.
- S.BUS2 system (faster than SBUS 1): by using the S.BUS2 system, you cany using the S.Bus2 system, multiple servos, gyroscopes and telemetric sensors can be easily installed with a minimum of cables.
- Model types:- 8-deck microlight. 7 wing types and 3 tail types are available for airplanes and gliders. The functions and mixes required for each model type are preset at the factory.
- Battery LiFe 6,6V / 2100mAh Lithium Ferrite.
- SD card (Not included): Model data can be stored on an SD card (SD: 32MB-2GB SDHC: 4GB-32GB).
- When the software files of the transmitter of your T18SZ are free, the software can be updated by internet.
- Edit Button:-Two edit buttons are provided, and the screen can quickly "return" to the home screen during operation. Adjustment operations can be performed easily by combining this button with a touch sensor.
- Vibration function: -A function that alerts the operator to various alarms by vibrating the transmitter in addition to a buzzer.
- Voice function The 18SZ is equipped with a function that allows the system to provide telemetry data by voice. This function can also be used with headphones (commercially available).

Contents of the box:

- Transmitter in mode 2 (gas left)
- Receiver R7014SB
- Transmitter battery 2100 mah LIFE
- Charger 220V
- 1 switch cord
- 1 user manual in French