NF-3m (mini) is a decorative lighting module for small models and for night flights in small spaces (''Indoor'' and ''SlowFlyer''). It is designed to power "high brightness" LEDs (Light-Emitting Diode) of 1.8 mm, 3 mm and 5 mm diameter or small SMD diodes. NF-3mECV6 is a modification of NF-3mNC module for "Indoor" type helicopters powered by a LiPol battery (EasyCopter V6, Lama or Blade) The unit powers up to six LEDs: 1 green sidelight (right, P1), 1 red sidelight (left, P2), 2 anti-collision flashes (1x F1 and 1x F2) and two landing lights (L1 and L2). L1 can be placed as a tail light.Set contents:Controller NF-3m-H1All LEDs are supplied 3 mm/10 mA (1xG, 3xR, 2xW), with cable soldered to the original controller
Help us to offer you the best price on the product "Indoor helicopter light set, 6 LEDs 3mm, 1S LiPo NightFly"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
The two flash circuits (F1 and F2) flash with a frequency of one second. Three connectors (jumpers 1, 2, 4) allow the selection of one of the eight predefined flash combinations. The sum of the numbers of the connected jumpers determines the sequence number of the combination. All inter-connectors disconnected select a 0 combination.
The module can be powered directly by a 3.5 - 5.5 V battery (1x LiPol or 4x NiMh or 4x NiCd). The lights will start working as soon as you switch on the supply voltage. The average consumption is about 23 mA with all lights on (4.2 V power supply, 10 mA for 3.5 V power supply and 30 mA for 5.5 V power supply). During 10 minutes of flight, the lighting consumes only 1% of the battery capacity.
NF-3m (mini) is a decorative lighting module for small models and for night flights in small spaces (''Indoor'' and ''SlowFlyer''). It is designed to power "high brightness" LEDs (Light-Emitting Diode) of 1.8 mm, 3 mm and 5 mm diameter or small SMD diodes. NF-3mECV6 is a modification of NF-3mNC module for "Indoor" type helicopters powered by a LiPol battery (EasyCopter V6, Lama or Blade) The unit powers up to six LEDs: 1 green sidelight (right, P1), 1 red sidelight (left, P2), 2 anti-collision flashes (1x F1 and 1x F2) and two landing lights (L1 and L2). L1 can be placed as a tail light.Set contents:Controller NF-3m-H1All LEDs are supplied 3 mm/10 mA (1xG, 3xR, 2xW), with cable soldered to the original controller
.jpg)
Paiement sécurisé
Livraison 24/48h
Paiement 3X
