Aerobatic Aircraft - PilotRC - EDGE 540 V3 - (approx. 1.90m) - Yellow, blue, grey

The Pilot-RC Edge 540 V3 75″ accurately reproduces the characteristic lines of the Edge 540 in a 1.90 m wingspan format. Designed for aerobatics and acrobatic flying, this model requires a 30 to 40 cc gas engine or an equivalent electric power system.

Its airframe has a length of 1.89 m with the 3.5-inch spinner installed. Pilot-RC specifies a wing area of 7,020 cm² and an empty weight of around 5.6 kg. The power system, radio equipment, and other necessary flight components must be selected separately.

Technical Specifications

• Model: Edge 540 V3 75″
• Wingspan: 1.90 m
• Length: 1.89 m
• Wing area: 7,020 cm²
• Stated empty weight: approximately 5.6 kg
• Spinner: 3.5 inches
• Recommended power system: 30 to 40 cc gas engine or equivalent electric motor
• Required servos: 5 to 6 high-torque servos (minimum 20 kg), plus a throttle servo for a gas setup
• Control setup: one servo per aileron, one servo per elevator half, and one rudder servo

Included Components

The kit includes the airplane airframe and the main accessories needed for assembly, including:

• carbon fiber main landing gear;
• tail gear;
• wing joiner tubes;
• control horns;
• wheels and wheel pants;
• pre-assembled linkages with ball joints;
• matching 3.5-inch spinner.

Additional Equipment Required

To complete and fly the model, you will also need:

• a 30 to 40 cc gas engine or equivalent electric power system;
• suitable servos;
• a transmitter and receiver;
• a propeller;
• required batteries;
• servo extensions;
• power and installation accessories suited to your chosen configuration.