The positioning beeper is connected between the receiver and a servo. In this way, the module detects the variation of the pulse width of the RC signal corresponding to the commands given to the servo. If the pulse width remains constant for one minute (e.g. in the case of a fail safe or a 2.4Ghz radio loss), a 92dB alarm is triggered. This module is perfect to find a model in the middle of tall grass for example or it will warn you if you forget to disconnect the battery with the radio on or not.
Help us to offer you the best price on the product "Positioning beeper"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
The module detects the variation of the pulse width of the RC signal sent to the servo. The alarm is triggered if the pulse width remains constant. It is therefore important to connect the module to an "active" servo during the whole flight (e.g. drift). Indeed, for example, if you connect the module to a retracted landing gear servo, the width of its impulse will not vary during the flight. The alarm will be triggered.
The positioning beeper is connected between the receiver and a servo. In this way, the module detects the variation of the pulse width of the RC signal corresponding to the commands given to the servo. If the pulse width remains constant for one minute (e.g. in the case of a fail safe or a 2.4Ghz radio loss), a 92dB alarm is triggered. This module is perfect to find a model in the middle of tall grass for example or it will warn you if you forget to disconnect the battery with the radio on or not.
Paiement sécurisé
Livraison 24/48h
Paiement 3X
Free delivery
