Beacon (drones/aircraft/glider/...) - BEACON AM DRONAVIA
  • Beacon (drones/aircraft/glider/...) - BEACON AM DRONAVIA
  • Beacon (drones/aircraft/glider/...) - BEACON AM DRONAVIA
  • Beacon (drones/aircraft/glider/...) - BEACON AM DRONAVIA
  • Beacon (drones/aircraft/glider/...) - BEACON AM DRONAVIA
  • Beacon (drones/aircraft/glider/...) - BEACON AM DRONAVIA
  • Beacon (drones/aircraft/glider/...) - BEACON AM DRONAVIA

Beacon (drones/aircraft/glider/...) - BEACON AM DRONAVIA

The Zephyr Beacon AM remote identification beacon allows any model aircraft to comply with the December 27, 2019 order. It is powered by a JST JR 3 pins plug between 3,7V and 12V. The beacon is delivered with a solder connector and a heat shrinkable sheath.we recommend the purchase of the optional patch cable to connect it to your receiverThe beacon's advantages:- French DGAC standards- compact- low power consumption- web page possible- possibility to make it HV compatible with a solder bridge
Read more
€40.00
Quantity :
Stock available

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

The Beacon AM is to be integrated inside the model, it must be powered by a voltage source of 3.7V to 8.4V. An LED indicates the status of it. Its light weight of only 9 g allows the device to be integrated on very small scale models. Its low consumption of 40 mA on average does not penalize the autonomy of the model aircraft.

It is delivered with a 3 pins JST JR to solder (compatible with most of the receivers : FUTABA, GRAUPNER, etc.) and a heat-shrinkable sleeve.

Characteristics

Frequency 2.4 GHz (2437 MHz)
WIFI channel 6
Internal antenna
Range 1 Km
Weight 9 G
Dimensions 28.5 X 19 X 11 mm
Power supply voltage 3.7 TO 8.4 V

298-BEACON-AM