With the iCharger DX6, renowned manufacturer Junsi has launched a DUO charger in a compact format.
The new DX6 charger combines the advantages of the successful Junsi iCharger 406DUO with the portability of a small pocket charger.
Despite its reduced dimensions of 92 x 112 x 40 mm, no concessions have been made in terms of performance and ease of use.
The technical specifications are impressive: a charging power of 1500 W (from >25 V), LiXx cells from 1 to 6 s and a charging current of up to 32 amps are sufficient even for large-capacity batteries.
Of course, all other battery types can be charged, such as LiHV, LiIo, NiZn, PB, NiCd or NiMh.
Discharge power is 60 watts in total (40 watts per output if only one output is used), but can be increased to 1600 watts by means of an external load (discharge resistor).
Of course, the iCharger DX6 can also handle regenerative charging. In this case, for example, battery capacity is fed back into the supply battery from a full flight battery.
The balancing current of 4 amps in total (2A per output) always guarantees perfectly balanced cell voltages.
A USB-C PD port is also integrated for charging smartphones, etc. (5V/3A, 9V/2A, 12V/1.5A) or for software updates.
The Micro SD slot can be used for data logging, but also for future updates.
A servo tester is also integrated, but please note that an external power supply is required!
The menu is almost identical to that of the famous Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.4" IPS LCD screen ensures good readability, even in low light conditions.
All Junsi X and DUO series chargers have been developed and approved for model-making use.
Industrial use is not intended and therefore not permitted! All Junsi chargers may only be used in conjunction with power supplies designed for model making!
Help us to offer you the best price on the product "Charger DX6 DUO -1500W - 9-34V Icharger"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
With the iCharger DX6, renowned manufacturer Junsi has launched a DUO charger in a compact format.
The new DX6 charger combines the advantages of the successful Junsi iCharger 406DUO with the portability of a small pocket charger.
Despite its reduced dimensions of 92 x 112 x 40 mm, no concessions have been made in terms of performance and ease of use.
The technical specifications are impressive: a charging power of 1500 W (from >25 V), LiXx cells from 1 to 6 s and a charging current of up to 32 amps are sufficient even for large-capacity batteries.
Of course, all other battery types can be charged, such as LiHV, LiIo, NiZn, PB, NiCd or NiMh.
Discharge power is 60 watts in total (40 watts per output if only one output is used), but can be increased to 1600 watts by means of an external load (discharge resistor).
Of course, the iCharger DX6 can also handle regenerative charging. In this case, for example, battery capacity is fed back into the supply battery from a full flight battery.
The balancing current of 4 amps in total (2A per output) always guarantees perfectly balanced cell voltages.
A USB-C PD port is also integrated for charging smartphones, etc. (5V/3A, 9V/2A, 12V/1.5A) or for software updates.
The Micro SD slot can be used for data logging, but also for future updates.
A servo tester is also integrated, but please note that an external power supply is required!
The menu is almost identical to that of the famous Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.4" IPS LCD screen ensures good readability, even in low light conditions.
All Junsi X and DUO series chargers have been developed and approved for model-making use.
Industrial use is not intended and therefore not permitted! All Junsi chargers may only be used in conjunction with power supplies designed for model making!
Paiement sécurisé
Livraison 24/48h
Paiement 3X
