308DUO 1300W 12V Icharger
  • 308DUO 1300W 12V Icharger
  • 308DUO 1300W 12V Icharger
  • 308DUO 1300W 12V Icharger
  • 308DUO 1300W 12V Icharger

308DUO 1300W 12V Icharger

If you need flexibility in your charges, the 308DUO charger from Icharger is for you! With its two independent outputs, you can charge two batteries of different technology at the same time. Each of the two outputs can provide a charge intensity up to 30A simultaneously. If you need even more power, you can combine the two outputs (synchronization mode) and charge up to 50A! The 308 DUO is able to charge LiPo, Lilo, LiFe, NiZn, NiCd, NiMh and Lead batteries.
Read more
€374.90
Quantity :
Stock available

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

General characteristics

  • Up to 8S LiPo, LiIo, LiFe and NiZn
  • from 1 to 20 NiMh/NiCd cells, from 1 to 15 Pb cells
  • 1A/5V USB output, suitable for charging a smartphone
  • Spark protection
  • Intelligent cooling by a sensor: control of the fan speed
  • Internal temperature protection
  • Possibility to save up to 64 parameters, import/export to SD card
  • 2.8" LCD displaying: current, voltage, power, capacity, internal resistance, duration ...
  • Internal resistance measurement of LiPo batteries by cells
  • Protection against polarity reversal
  • Possibility to update the charger by USB or SD card. The "Logview" software can display, analyze the data of the charge or discharge (http://www.logview.info )

Technical specifications

  • Dimensions : 171.2×117.8×58.8 ±0.5mm
  • Weight : 910g
  • Power supply voltage: 10-30V Dc
  • Max. input current: <60A, CH1/2<40A
  • Max. charge/discharge current: 50A in synchronous mode 50A in synchronous mode, 30A in asynchronous mode
  • Max. load power 1300W in synchronous mode (800W per output at input voltage > 23.5V)
  • Max. discharge power 130W in synchronous mode (80W per output)
  • 2 regenerative discharge modes: input or output 1
  • Max. regenerative discharge power 1300W in synchronous mode (800W per output)
  • Extra" discharge power for LiPo (by adding an external resistor on the "red" wire of the chagrass cord) : 2100W in synchronous mode (1050W per output @35V/30A)
  • Max. balancing current 2.4A in synchronous mode, 1.2A in asynchronous mode

Contents of the box

  • 308DUO charger
  • 12V power cord (with stripped wires at one end)
  • 2 cords with banana plugs, other end stripped wires
  • 2 balancing plates
  • 2 cables for balancing board
  • 1 CDROM containing the manual and the "Logview" software
192-308DUO
  • Charger source : 12V only
  • Charger power in Watts : 1300