Yuki Model Samurai 60A LED Programming Card

Brushless motor-controller set with 60A esc.
The YUKI MODEL Samurai combo type B4 is a combination of LiPo controller and brushless motor for RC cars in 1:10 scale. The controller offers constant current up to 60A with short term peaks up to 380A. It is designed to work with LiPo batteries (2S-3S) or NiMH packs (6-8 cells). A built-in switching BEC provides up to 3 A of current at 6 V to save a separate power supply for the receiver. The controller generates a resistance of only 0.7 mOhm. Its dimensions are 42 x 34 x 35 mm, the weight is 107 g. The motor has a specific speed of 4350 rpm / V (KV) and a standard shaft diameter of 3.175 mm. Its diameter is 36 mm, its length is 50 mm and its weight is 179 g.

Programmable parameters
Cut-off voltage
Direction of travel
Motor timing
Acceleration
Reverse acceleration
Acceleration limit
Braking force
Brake function
Motor direction
Neutral point