• Out-of-Stock
Graupner Falcon 12 HoTT 6 channel Gyro 2.4GHz receiver

Graupner Falcon 12 HoTT 6 channel Gyro 2.4GHz receiver

With the Falcon 12, Graupner presents its new powerful 6-channel receiver. A 3-axis gyroscope and a 3-axis acceleration sensor (A-meter) are integrated.The receiver transmits receiver voltage, temperature and signal strength without additional sensors.The new antenna amplifier offers a higher range despite the single antenna. The faster 32-bit L4 processor guarantees energy-efficient work and the higher performance ensures that the Falcon 12 can also be used as a flybarless system for helicopters and as a flight controller for helicopters.Of course, the integrated Falcon gyro system can also be used perfectly for surface models. There are different gyro modes: OFF, normal stabilization, heading lock and rotation mode, which makes flying with knives and simple torque very easy and supports the pilot.The Falcon 12 is therefore the versatile among the 6-channel receivers.
Read more
€99.90
Quantity :
Out-of-Stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Extremely fast, easy and comfortable setting with the Hott transmitter telemetry menu
regional models
Stabilization of the flight model in difficult wind conditions up to 3 axles
Natural flight behavior due to proportional gyro suppression
The 3-axis gyro makes it easy to fly even difficult aerobatic models and aerobatics are extremely easy to fly.
flight maneuvers can be performed much cleaner
3 different gyro modes: OFF, normal stabilization, heading lock and rotation mode for easy knife edge flying and torque control.
Easy adjustment of gyro assignment
Parameter adjustment via HoTT telemetry
Flybarless system for helicopters
Basic configuration achieved in minutes
Fast and innovative axis assignment for flexible mounting direction
Small footprint due to size, weight and elimination of cables for easy installation
Particularly vibration-resistant 3-axis sensors of the latest generation
Optimization of swashplate spin and direction of back-torque compensation are automatically detected
All common helicopter swashplates 90/120/135/140 degrees
Adjustable rocker arm rotation up to 90 degrees for multi-blade heads
Clear standard menu and, if required, expert menu
Sensitivity The sensitivity parameters in flight can also be adjusted to the speed and style depending on the flight phase via the encoder.
Very fast due to no transmission time between receiver and flybarless system
Very direct control feeling
Telemetry support for own Hott sensors and Hott sensors from other suppliers
SUMD output for other flybarless receivers.
Voltage input for external voltage divider, e.g. already included in S3082 and S3083 controllers.
-HV Input voltage range 3.6... 12.6 V
can be programmed and used with all HoTT transmitters with telemetry, programming and operation.

Simple programming of the basic settings via telemetry.
Pirouette optimization is automatically determined from the parameters and works extremely well.
Extreme flight stability combined with full 3D capability, even with the basic settings.
The back effect and swashplate effect can be easily adjusted via the telemetry menu or via selectable encoders.
Further optimization possibilities in expert mode for your personal flying style and interests.
Extremely simple adjustment of the basic settings via telemetry:
Rotor direction
Swashplate type
Swashplate frequency 50... 200 Hz
Swashplate direction
Swashplates Central servo motor 1 ... 3
Swashplates cyclically set to 8° stroke.
Swashplate Step path A/B
Swashplate limit
Swashplate rotation
Rear servo motor Central impulse 760µs, 960µs, 1.5 ms
Rear servo frequency 50 ... 333 Hz
rear servo in middle position
Expo yes/no
Recording for service purposes
Expert mode yes/no
Simple assignment of the rotary axes
gyro effect for tail and swashplate via telemetry or adjustable encoders.
Other parameters can be set in expert mode.
The traditional Graupner company was run by the same Graupner family until 2013. Stephan Graupner of the third generation decided to move the company to Kirchheim under Teck. In March 2013 the company was taken over by its main radio control distributor HoTT. Graupner covers all model making products such as RC cars (GM), helicopters, airplanes, RC systems (currently HOTT 2, 4GHZ), chargers, numerous internal combustion engines (OS) and electric motors (Brushless). Graupner currently supplies more than 2000 specialist shops worldwide.

094-S1035