Phoenix Edge 160A HV CASTLE CREATIONS

Phoenix Edge 160A HV CASTLE CREATIONS

This new series of controllers, the Phoenix Edge from Castle Creation has the particularity to have a programmable auxiliary cord offering to the modellers functions until now non-existent. Indeed, this auxiliary cord allows to adjust in flight the gain of the rudder of a helicopter, can engage a beacon in case of emergency landing (useful to find your model for example in tall grass!), ... The Phoenix Egde has a built-in data logger, and is programmable via the Castle Link interface.The Phoenix Edge from Castle Creations is used for helicopters from 450 to 800 class and all types of aircraft.
Read more
€399.95
Quantity :
Stock available

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Technical specifications

  • Input voltage : MIN: 3S LiPo MAX: 12S LiPo
  • Max. full gas consumption: 160A (with airflow)
  • Dimensions: 108.4x50.8x31.5mm
  • Weight with wires: 232.8g
  • Weight without wires: 150.6g
  • Fully programmable using the Castle link interface and free downloadable software
  • Compatible with the Castle Field Link programming card
  • Controller sold without connectors (stripped wires)
  • Programmable auxiliary white wires (see picture below): adjustable in-flight gnor gain, beeper, RPM for 3-axis gyro, motor anti-start, lock or unlock the controller on a switch on the transmitter (for example)

Manual

To download

095-CC-010-0103-00