The SMART SX M-LINK is a compact, intelligent, 6-channel radio control system for beginners, with amazing and partly patented features.Thanks to the M-LINK ID receiver, the transmitter recognizes the model and activates the settings corresponding to it by drawing on its numerous model memories (50). The 2.4 GHz M-LINK transmission system ensures maximum range. Of course, the SMART SX can be used with any other M-LINK receiver. All MULTIPLEX-compatible models in ELAPOR®, from the RR+ to the RTF versions, are already programmed into it. Because of the simple operation of the transmitter, you can easily tune almost any other model from various manufacturers. Even the last fine-tuning of the model's trim will be saved.
Help us to offer you the best price on the product "Smart SX 6 M-Link (Mode 1+3) + RX-5 M-LINK ID 1 2.4Ghz - Multiplex"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
IOAT: new patented antenna technology. For a clear improvement of the safety standard, the range of the transmitter is much higher than the visual limit (no backward transmission waves)
Antenna integrated in the housing
Can be mounted in almost all RC models currently on the market
An incredible number of models can be flown at the same time, without any interference
Long operating time, up to 25 h
Digital trim
Upgradeable via integrated port (USB cable and MPX-Launcher)
Ergonomics: lightweight, easy to handle, optimized to be held in the hand
Buzzer for acoustic information: Trim, Dual-Rate, control mode selection, transmitter batteries, range test
Wireless training possibility with M-LINK training key (for all MPX monitor transmitters with multi-function socket) or training module (PROFI TX)
5 fully proportional channels: Depth, rudder, aileron, motor, one channel on switch located on the Power trim switch
Mode 1: left stick: rudder and elevator / right stick: throttle and ailerons or Mode 3: left stick: ailerons and elevator / right stick: throttle and rudder
The SMART SX M-LINK is a compact, intelligent, 6-channel radio control system for beginners, with amazing and partly patented features.Thanks to the M-LINK ID receiver, the transmitter recognizes the model and activates the settings corresponding to it by drawing on its numerous model memories (50). The 2.4 GHz M-LINK transmission system ensures maximum range. Of course, the SMART SX can be used with any other M-LINK receiver. All MULTIPLEX-compatible models in ELAPOR®, from the RR+ to the RTF versions, are already programmed into it. Because of the simple operation of the transmitter, you can easily tune almost any other model from various manufacturers. Even the last fine-tuning of the model's trim will be saved.
.jpg)
Paiement sécurisé
Livraison 24/48h
Paiement 3X
