Kit for building a high-performance hand-launched RC glider for discs or rubber bands with a 1498 mm wingspan. Very light balsa wing with carbon tube main spar, balsa fuselage, carbon tailboom. Aileron, rudder and elevator control. CNC-cut parts.
Help us to offer you the best price on the product "KAVAN Strike DLG 1498mm glider kit"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
You'll need at least a four-channel radio to control your STRIKE DLG. A computer radio is preferable; it will allow you to adjust the aileron differential, airbrakes and mixes, which will make launching the disc much easier. Good 6 g micro-servos (0.7-0.9 kg-cm torque) are required for aileron, elevator and rudder; the servo plates supplied in the kit are suitable for KAVAN GO-6MG servos.
A LiPo 1S 3.7 V 500-600 mAh battery would make an excellent receiver battery.
The kit contains CNC-cut balsa and plywood parts, carbon tubes for the main wing spars, carbon tailboom, set of accessories, sheet of stickers, full-scale construction plan, instruction manual.
Kit for building a high-performance hand-launched RC glider for discs or rubber bands with a 1498 mm wingspan. Very light balsa wing with carbon tube main spar, balsa fuselage, carbon tailboom. Aileron, rudder and elevator control. CNC-cut parts.
Paiement sécurisé
Livraison 24/48h
Paiement 3X
