ElectroStreak 1.1m BNF Basic with AS3X+ and SAFE Select

Introducing the E-flite ElectroStreak 1.1m RC airplane

Inspired by an original design from scratch, which was later sold in kit and ARF versions, the E-flite® ElectroStreak 1.1m is designed to include many modern features and conveniences, offering excellent handling and high-speed performance! It assembles quickly and easily with just a few screws, and is ideally sized for easy storage and transport without disassembly. It's also easier to take off and land than low-wing, high-speed models like the V900, especially the BNF (Basic) version, which features the improved AS3X+ and SAFE Select technologies as optional extras. And both versions include Spektrum digital servos with metal gears, a Smart Lite 45A ESC, plus a 3S and 4S compatible motor!

E-flite ElectroStreak 1.1 m RC airplane at a glance

If you're looking for the thrill of speed, the ElectroStreak 1.1 m is one of the fastest propeller-driven E-flite aircraft ever designed! With 3S 1800-2200mAh batteries and the factory-installed brushless power system, the ElectroStreak reaches speeds of up to 100 MPH. This makes it an excellent choice for intermediate pilots with some experience of high-speed flying. Particularly when using the BNF (Basic) version with enhanced AS3X+ and SAFE Select (optional), with automatic manual launch assist mode technologies. More experienced pilots can reach top speeds of up to 120/130 MPH with the popular 4S 1800-2200mAh batteries! The Spektrum Avian 45A Smart Lite controller lets you fly at high speed with confidence in the knowledge that everything is working perfectly with the power system and battery, thanks to real-time telemetry data sent via compatible receivers (including the AR631+ of the Basic BNF version) to Spektrum AirWare-equipped transmitters.

Speed and aerobatic enthusiasts will appreciate the locked-in precision of four digital servos with metal gears and ball-jointed linkages. They enable a wide range of evolutions, right up to high-speed aerobatics. And the optional flaperons and spoilerons offer even more capabilities! The elegant airframe is fully composite-reinforced and molded with high-density EPO, making for a strong, rigid airframe. What's more, its striking, high-contrast factory finish provides good visibility for improved orientation. No glue is required for assembly. A total of three screws install the stabilizer and one-piece wing, which is easily attached and removed for convenient storage and transport. This means you can be ready for the ultimate high-speed flying experience in less time than it takes to charge a battery!

E-flite ElectroStreak 1.1m RC Airplane Video

FEATURES of the E-flite ElectroStreak 1.1m RC Airplane

• Specially tuned motor compatible with 3S and 4S batteries with no modifications or options required
• Extremely wide flight envelope, from amazingly stable slow flight to precision-locked aerobatic capabilities and beyond
• Factory-installed brushless motor, APC 8x8E propeller and cone with aluminum backplate
• Receiver loaded with a Smart transmitter file that lets you import all NX and iX series transmitter parameters during the linking process

• The unrivalled stability and locking feel of exclusive, enhanced AS3X+ technology
• Easier to launch than low-wing models, thanks in particular to the automatic launch assistance mode
• Quick and easy bolt-on assembly - no glue or special tools required
• Convenient top hatch for easy battery access
• Optional flaperons and spoilers for additional capabilities

Skill Level 2 - Some experience required

Skill Level 2 aircraft, like this one, are suitable for RC pilots who already have some experience and the necessary skills to assemble, configure and fly models of a similar class. You should have the experience and skills necessary to successfully fly models such as the E-flite T-28 Trojan 1.1 m, Sportix 1.1 m, Conscendo Evolution 1.5 m, 64 mm and over EDF, or other models of similar class before attempting to fly the ElectroStreak 1.1. m BNF basic version

Smart technology

The ElectroStreak 1.1 m is equipped with an exclusive Spektrum Avian Smart Lite controller that can provide a variety of telemetry data related to the power system in real time, such as: engine speed, current, battery voltage and much more - with Smart and non-Smart batteries - via compatible receivers. (including AR631+) and Spektrum AirWare-equipped transmitters (including DX6e and 8e, DX6 G2/3 and 8 G2, DX9, NX6 to 20, iX12 to 20 and others) during your flight. What's more, the receiver is loaded with a Smart transmitter model file that lets you import all NX and iX series transmitter parameters during the linking process.

Versatile power

ElectroStreak is factory-fitted with a high-performance brushless power system that gives you the freedom to choose the speed at which you want to fly. Use a 3S 1800-2200mAh battery to reach flying speeds of up to 100 MPH. Or go beyond and reach top speeds of up to 120/130 MPH with a 4S 1800-2200mAh battery.

Strength and precision

Speed is nothing without the right balance of strength and control. ElectroStreak's elegant cell is molded in composite-reinforced EPO, making it rigid and durable yet lightweight. What's more, it's equipped with digital servos with metal gears that offer the precise control and reliability you need to enjoy high speeds, flight after flight.

Easy assembly

No glue is required for final assembly, and you can get the ElectroStreak 1.1 m ready to fly in less time than it takes to charge a battery! And while it's conveniently sized to be transported fully assembled in just about any vehicle, you can also remove the one-piece wing for even easier storage and transport.

Product Specifications