Proxxon DS 460 - 2 Speed Cutting Saw

Technical data:

230V. Powerful brushless motor with 2 speeds (205 W). Reach 460 mm. Adjustable from 900 or 1.400 rpm. Stroke 18 mm. Table size 400 x 250 mm. Maximum cutting depth 65 mm, 32 mm for 45° mitre. L 580 mm, W 320 mm, H 300 mm. Weight approx. 20 kg.

Extremely important: A rotary knob allows a sensitive fixation of the saw blades.

Quick blade change without searching: With rear-mounted table!
Innovative solution (patented): To facilitate the saw blade change, the table can be moved 80 mm to the rear of the machine. For a clear view of the lower saw arm when locking the sliding block or when attaching the spiked blade.

The patented sliding blocks ensure precise blade alignment with a high degree of effort. The recesses in the table surface serve as a guide line for defining the position and assembly of the saw blade.

The table can be adjusted from -5° to 50° for miter cuts. With large grid dimensions of 0°, 10°, 20°, 30° and 45°, and adjustable precision positioning.
Note:
When cutting very hard workpieces (iron), the teeth wear relatively quickly in the contact area. The upper part of the blade teeth can be used to increase the contact area of the workpiece.

The DS 460 is equipped with a vacuum connection with adapter for vacuum cleaner. For clean, dust-free work. We recommend the use of our CW-matic compact vacuum cleaner.
Supercut fine blades without spikes. 130 mm.

Recommended accessories (not included)

For hard and soft wood, plastic, plexiglass and soft non-ferrous metal.

Coarse teeth (No. 9: 14 teeth on 25 mm):
NO 28 116 130 x 1,50 x 0,48 mm 12 pieces

Medium tooth (No.5: 17 teeth on 25 mm):
NO 28 117 130 x 1,20 x 0,38 mm 12 pieces

Fine toothing (No.3: 20 teeth on 25 mm):
NO 28 118 130 x 0,80 x 0,34 mm 12 pieces

For hard materials like iron and PERTINAX.

Medium toothing (No.5: 36 teeth on 25 mm):
NO 28 112 130 x 0,85 x 0,4 mm 12 pieces

Fine tooth (No.3: 41 teeth on 25 mm):
NO 28 113 130 x 0,75 x 0,36 mm 12 pieces

Ultra fine teeth (No.1: 50 teeth on 25 mm):
NO 28 114 130 x 0,6 x 0,3 mm 12 pieces

Round blade. 130 mm. With flat ends (without pin).

For circular cuts from 1.5 mm. Cutting on all sides, no turning of the workpiece required (important for large workpieces). For plastic, soft and hard wood.

NO 28 747 130 x 1.2 mm 12 pieces

Standard blades with pin for fine cuts. 127 mm.

Coarse tooth (10 teeth on 25 mm):
For soft and hard wood, plastic and other soft and especially thick materials.
NO 28 741 127 x 2,61 x 0,51 mm 12 pieces

Normal toothing (18 teeth on 25 mm):
For fine materials, soft and hard wood, plastic.
NO 28 743 127 x 1,86 x 0,24 mm 12 pieces

Fine toothed (25 teeth on 25 mm):
For non-ferrous metals, fiberglass, plastic, wood and Plexiglas.
NO 28 745 127 x 1,76 x 0,25 mm 12 pieces