Proxxon THERMOCUT 230/E Hot Wire CutterFor model making by architects, designers, decorators, artists (also for practical work in applied art) and for prototype construction. Stable frame and 390 x 280 mm surface made of aluminum composite material. Structured surface, allowing an even gliding of the part to be cut. The screen-printed frame and the design of the corners facilitate practical work. Solid aluminum bow (350 mm reach and 140 mm passage height). With clamp and spool (supplied with 30 m of wire Ø 0.2 mm). Mitre cuts are possible by sliding the clamp. An LED light prevents burning of fingers, as the hot wire reaches full temperature in less than a second.The correct temperature (depending on material and thickness) is determined with a little sensitivity and practice. The correct temperature (depending on the material and thickness) is determined with a little sensitivity and practice, but an optimal cut is achieved with a measured temperature and pressure.Important: Thanks to the integrated isolating transformer and the class 2 insulation protection, this device is perfectly safe. The heating elements operate with a current of 10 V at 1 A.
Help us to offer you the best price on the product "Proxxon THERMOCUT - Hot wire cutter for cutting polystyrene and thermoplastic film"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
230 V, 50/60 Hz. Secondary supply: max. 10 V at 1 A. Cutting wire temperature 0.2 mm adjustable from approx. 100 to 200 °C. Weight approx. 3 kg. Protective insulation class 2.
Technical details
Aluminium composite table for easy and even sliding of the parts to be cut. Cutting marks and corners are silk-screen printed. A simple and effective solution for circular cuts: attach an upside-down pin to the table top with adhesive tape. It then serves as a center pin. Bi-functional stop with lockable guide (German patent no. 100 00 102.5).
Note:
Polystyrene is an inexpensive material that is very environmentally friendly compared to other materials and can be easily cut with a hot wire. This material is available in almost all DIY stores in the standard size of 50 x 100 cm and in thicknesses of 2 to 16 mm.
Proxxon THERMOCUT 230/E Hot Wire CutterFor model making by architects, designers, decorators, artists (also for practical work in applied art) and for prototype construction. Stable frame and 390 x 280 mm surface made of aluminum composite material. Structured surface, allowing an even gliding of the part to be cut. The screen-printed frame and the design of the corners facilitate practical work. Solid aluminum bow (350 mm reach and 140 mm passage height). With clamp and spool (supplied with 30 m of wire Ø 0.2 mm). Mitre cuts are possible by sliding the clamp. An LED light prevents burning of fingers, as the hot wire reaches full temperature in less than a second.The correct temperature (depending on material and thickness) is determined with a little sensitivity and practice. The correct temperature (depending on the material and thickness) is determined with a little sensitivity and practice, but an optimal cut is achieved with a measured temperature and pressure.Important: Thanks to the integrated isolating transformer and the class 2 insulation protection, this device is perfectly safe. The heating elements operate with a current of 10 V at 1 A.
.jpg)
Paiement sécurisé
Livraison 24/48h
Paiement 3X
Free delivery
Free delivery