- Paiement sécurisé
- Livraison 24/48h
- Paiement 3X
Technical data:
- Motor 230 V, 100 W, 50/60 Hz.
- Center distance 250 mm.
- Height of spikes 40 mm.
- Spike height 25 mm.
- Infinitely variable speed control from 1.000 to 5.000 rpm.
- Main shaft 10 mm.
- Headstock stroke 20 mm.
- Supplied with 6 collets (2 - 3 - 4 - 6 - 8 and 10 mm), drive knob, sliding block and circular drive plate.
Features
- Powerful motor, adjustable speed from 1.000 to 5.000 rpm.
- Stable frame with large aluminum profiles.
- Spindle mounted on bearings with bore (10 mm) for mass production of small parts.
- Serrated jaws with centered tip and 10 mm shank.
- Stable and height-adjustable tool holder that can be turned in all directions.
- Rotating tailstock.
- A circular drive plate (for larger parts) is included.
Compatible accessories (not included)
4-jaw chuck for DB 250
Individually adjustable jaws. For clamping asymmetrical wooden workpieces. Clamping capacity with reversible jaws: inside 1.5 to 35 mm, outside 14 to 67 mm. Internal thread M 16 x 1 for attachment to the main shaft of the DB 250.
NO 27 024
3-jaw chuck for DB 250
Concentric clamping. Pressurized steel. Clamping capacity with reversible jaws: inside 1,5 to 20 mm, outside 12 to 50 mm. Threaded chuck M 16 x 1 for mounting on the main shaft of the DB 250.
NO 27 026
Set of 5 turning tools
High quality and most common shapes: scraper, tubes 3 mm and 6,4 mm, pointed chisel and slicer. Cleanly packed in a wooden case.
NO 27 023
Spindle chuck for the DB 250 tailstock
Clamping range up to 5 mm. To be fixed instead of the rotating tailstock. Feed by moving the headstock.
NO 27 028