Proxxon FD 150/E Precision Lathe2-speed belt drive with additional electronic control allows spindle speeds up to 5,000 rpm. For flat turning, longitudinal turning, hollow turning, tapered turning, tapping and drilling. Complete with 3-jaw chuck and rotating tip. Centre distance 150 mm. Height of tips 55 mm. Height above the support 33 mm.
Help us to offer you the best price on the product "Proxxon Precision lathes FD 150/E"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
Machine base with dovetail guide in extruded aluminum.
Base made of die-cast aluminum. With low-noise special current motor, 2-speed belt drive and additional speed control: For high torque at low speed for large parts and for the right cutting speed even with smaller parts. Relay switch with emergency stop function and restart protection. Precision spindle with 8.5 mm through hole. Chuck for the ER 11 collet standard.
Concentric 3-jaw chuck: inner jaw 1 - 20 mm, outer jaw 20 - 50 mm.
Tailstock made of die-cast aluminum. With pinole and turning tip (MK 0/short adjustment).
Support: can be moved manually on the base and locked with lever. Rotating support for turning 6 x 6 mm steel. Possibility of working by sliding up (60 mm travel) and cross adjustment (40 mm travel). Adjustment of the angle of the upper blade of the rotating cones to + / - 45 °.
Cranks with adjustment to 0 (1 division = 0.05 mm, 1 turn = 1 mm).
Technical data:
230 V. 50/60 Hz. Maximum width 150 mm. Maximum height 55 mm. Top height of the support 33 mm. Sliding transversal displacement (X) 40 mm, upper carriage (Z) 60 mm. Rotating support for turning 6 x 6 mm steel. Spindle bore 8,5 mm. 2 belt speeds with speed control: Speed 1 = 800 - 2.800 rpm. Speed 2 = 1.500 - 5.000 rpm. Dimensions 360 x 150 x 150 mm. Weight approx. 4,5 kg. Built according to class 1.Proxxon Precision lathes FD 150/E
Proxxon FD 150/E Precision Lathe2-speed belt drive with additional electronic control allows spindle speeds up to 5,000 rpm. For flat turning, longitudinal turning, hollow turning, tapered turning, tapping and drilling. Complete with 3-jaw chuck and rotating tip. Centre distance 150 mm. Height of tips 55 mm. Height above the support 33 mm.
Paiement sécurisé
Livraison 24/48h
Paiement 3X
