- New

The new Robbe Ro-Power ULTRA HP and MAXAMP are selected high-performance cells with a new chemical structure. They have very low internal resistance and maintain their voltage even under high loads. Of course, the packs are manufactured to the highest manufacturing quality and standards, with careful selection of the best components. This also enables us to guarantee very high cycle resistance. Discharge currents (C-rates) are deliberately very conservative and can therefore be permanently withdrawn.
The relatively low weight is another advantage of the Robbe Ro-Power ULTRA series.
The ULTRA HP series is made with 25(50)C for all standard requirements throughout the RC range.
The MAXAMP series with 35(70)C is even more resistant and is used in the high-performance field, where higher currents and voltage stability under load are required.
Note: the dimensions and weights given correspond to the measured values of several batteries of the same type. These values are, of course, subject to the usual manufacturing fluctuations!
In addition, most batteries are not symmetrical with a more accurate measurement and have different dimensions to the rest of the battery, for example due to cable outlets. Likewise, batteries are often not exactly identical in thickness/height!
Capacity (mAh): | 3300 |
---|---|
Voltage (V): | 11,1 |
Weight (g): | 271 |
Length (mm): | 136-136,5 |
Type: | LiPo |
Width (mm): | 42-46,6 |
Number of cells: | 3S |
LiPo discharge (C): | 35(70) |
Height (mm): | 20,6-23 |
Connection: | XT-90 |
Balancing connector: | XH |