• Out-of-Stock
HV 250mm electric AF air brake pair XPOWER
  • HV 250mm electric AF air brake pair XPOWER
  • HV 250mm electric AF air brake pair XPOWER
  • HV 250mm electric AF air brake pair XPOWER

HV 250mm electric AF air brake pair XPOWER

New HV version: works between 4.8V and 8.4V !Excellent ! electrically controlled airbrakes, connected directly to the receiver, they go out proportionally. much simpler to install (only two screws), these airbrakes are also more economical than the classic AF with the cost of the two servos.
Easy to adjust (adjusting the limit switches on your transmitter). red anodizedAF for the outgoing part, sold by pair
Read more
€63.90
Quantity :
Out-of-Stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Electric airbrake combining efficiency of installation, use, and more economical than a complete system AF + servo.
Works with all common brands of radio (Futaba, Graupner, SPektrum, Multiplex, etc ...)

This airbrake has an integrated lock to avoid the consumption of the electric motor in closed position.

Double metallic blades (orange anodized) type Schempp-Hirth for an optimal braking effect.

Delivered in pairs (right and left).

Technical data:

  • Total length: 300mm approx.
  • Width: 9,5mm approx.
  • Height AF in: 10mm approx.
  • Height AF out: 31mm approx.
  • Weight: 33g approx (piece)
  • Blade length: 250mm
  • Height (protruding above the wing form): 21mm Max. approx.
  • Power supply voltage: 4.8-8.4V
  • Power cord length: 200cm approx (standard UNI plug)

Important note: Please set the limit switches on your transmitter so that the AF does not go beyond the limit stop, as this will cause the motor to burn out (not covered under warranty).

038-099ELAFHV25