IGNITION TESTER CDI RCEXL

IGNITION TESTER CDI RCEXL

This device reproduces the signals coming from the Hall effect sensor of the gasoline engines and transmits them to the CDI ignition module RCEXL

Read more
€7.90
Quantity :
Stock available

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Thus, it becomes possible to test the RCEXL ignition without running the engine.

Thanks to a knob, it is possible to vary the number of pulses (number of sparks at the spark plug) to simulate different speeds from 400 to 20000 rpm.

Ideal to perform, in complete safety, tests to test the ignition or test the range of the radio because the receiver can be disturbed by radio noise (interference), etc.

Technical data:

  • Supply voltage: 4.8 to 6.2V (ignition battery pack)
  • Adjustable speed range: 400-20 000 rpm
  • Dimensions: 21.5x16.0mm approx.
  • Weight: 2.0g approx.

PRECAUTIONS FOR USE!

CAUTION

This tester will create a spark on the spark plug, and if it is still mounted on the engine, any fuel vapor still inside the engine may ignite and cause the propeller to spin and/or cause a flame/heat in the exhaust.

DO NOT TOUCH THE CANDLE while it is running, or you will receive an electric shock! Caution! May cause electric shock or fire! High voltage in the ignition cable, cap...During use, please be careful to avoid electric shock!

Please do not use near flammable materials. High voltage pulse (spark) > ignition of combustible materials - there is a risk of fire!

Note that this system is suitable for the RCEXL ignition unit.

Using this tester with other ignition modules may not work properly and may even damage the ignition

038-142CT