Charger 306B 1000W 12V Icharger

More details in pictures

Input cord up to 38V DC + mini USB plug	JST-XH balancing ports + temperature sensor socket + load output

General specifications

• Up to 6S LiPo, LiIo, LiFe
• from 1 to 25 NiMh/NiCd cells, from 1 to 18 Pb cells
• Intelligent cooling by a sensor: control of the fan speed
• Internal temperature protection
• 10 battery profile memories
• The iCharger 206B has a 16Mbit flash memory that stores data for 36 hours without power
• 2x16 LCD display showing: current, voltage, power, capacity, internal resistance, duration ...
• Internal resistance measurement of LiPo batteries/cells
• Protection against polarity reversal
• Possibility to update the charger by USB. The "Logview" software can display, analyze the data of the charge or discharge (http://www.logview.info )

Technical specifications

• Dimensions : 143x123x46 mm
• Weight: 750g
• Supply voltage: 4.5-38 V Dc
• Max. charge/discharge current: 30A, 30A 30A, 30A
• Max. charging power 1000W at 23V (500W at 12V)
• Max. discharge power : 80W
• Max. regenerative discharge power 1000W (DC input becomes an output)
• Extra" discharge power for LiPo (by adding an external resistor on the "red" wire of the chagrass cord) : 1200W @40V/30A
• Max. balancing current 500mA

Contents of the box

• Charger 306B
• Alligator clips charging cable
• 1 temperature probe
• 2 alligator clips for the input cable
• 1 USB cable
• 1 CDROM containing the manual and the "Logview" software