Charger S65 Screen (2-4S AND 6A- 65W) 220V Sky-Rc

Ref: 096-SKY100152

Add to my favorites Remove from my favorites

The S65 from SKYRC is a mains powered charger/discharger with a compact size (117 x 105 x 55 mm). Like most SKYRC chargers, it features TVC (Terminal Voltage Control), battery measurement and can be connected to a PC for PC control and firmware updates. The S65 has a maximum charge power of 65W with a maximum charge current of 6A and a maximum discharge current of 2A. It is a high-performance, microprocessor-controlled charge/discharge station with battery management, suitable for all types of batteries: LiPo, LiIon, LiFe, NiCd, NiMH, Pb and even the new generation of LiHV batteries with an end-of-charge voltage of 4.35 V. For lead-acid batteries, the e680 adds AGM and Cold Charge modes. It can charge AGM batteries and lead-acid batteries can be charged in cold weather in "Cold Charge" mode. The advantages of this charger: - compatible LiPo HV - LiPo tester (voltage & internal resistance) - 220V power supply - possible control on PC

Paiement sécurisé
Livraison 24/48h
Paiement 3X

Cheaper elsewhere?

Product description
Product characteristics

Specifications

Power supply : 100-240 V AC (Mains)
Display type: LCD 2 lines of 16 characters
Backlighting : Blue
Housing: Plastic
Control: Four buttons
Housing dimensions: 117 x 105 x 55 mm
Weight: 315 g
External sockets: XH balance sockets for 2 to 4 cells, temperature sensor socket, XT60 female battery charging sockets.
Delta-Peak detection for NiMH/NiCd: 3-15 mV/cell, fault 4 mV/cell.
Safety cut-off temperature: 20 °C/68 °F to 80 °C/176 °F (adjustable)
End of charge voltage: NiMH/NiCd: delta-peak detection
LiPo: 4.18-4.25 V/cell LiIon: 4.08-4.2 V/cell
LiFe: 3.58-3.7 V/cell LiHV: 4.25-4.35 V/cell
Pb Normal: 2.4 V/cell Pb AGM: 2.45 V/cell
Pb Cold: 2.45 V/cell
Balancing current: 200 mA/cell
Voltage reading range: 0.1-26.1 V/cell
Number of cells per battery type: LiPo/LiIon/LiFe/LiHV: 2 to 4 cells
NiMH/NiCd: 6 to 8 cells
Lead: 3 to 6 cells
Battery capacity range: NiMH/NiCd: 100-50000 mAh
LiPo/LiIon/LiFe/LiHV: 100-50000 mAh
Lead acid: 100-50000 mAh
Charging current: 0.1 to 6.0 A
Safety timer: 1-120 minutes / OFF
Charging power: 65 W
Discharge current: 0.1 to 2.0 A
End of discharge voltage: NiMH/NiCd: 0.1-1.1 V/cell
LiPo: 3.0-3.3 V/cell LiIon: 2.9-3.2 V/cell
LiFe: 2.6-2.9 V/cell LiHV: 3.1-3.4 V/cell
Pb: 1.8 V-2.0 V/cell
Discharge power: 10 W
Number of cells that can be balanced: 2-4 cells
Memories: 10 different charge/discharge profiles.
Charging methods: DC/CV for Lithium and Lead Acid batteries
Delta peak detection for NiMH and NiCd