Magnetic switch - SKY RC
096-SKY600155-01
Effortlessly activate your RC model's receiver with a simple flick of the magnet.
Safely integrated into your installation, it offers transparent control and intuitive operation, eliminating the drawbacks of traditional switches.
A simple flick of the magnet and you're ready to go: power!
How to use:
1 - Activating the switch
- Place the magnet directly over the sensitive area (1.0 to 1.5 cm above the LED) to turn on the switch.
- The green LED will light up to indicate that the output device is powered.
2 - Switch off
- To switch off the switch, pass the magnet over the sensitive area again.
- The green LED will go out to indicate that the output device is no longer powered.
3 - Status memory in case of power failure
- If the power is cut, but restored within 10 seconds, the switch returns to its previous state.
- If the power supply is cut for more than 10 seconds, the ON/OFF status is randomized after the power supply is restored.
| Element | Description |
| Supply voltage | DC 3-13V |
| No-load current | <5uA (when output is off) |
| <3.5mA (when output is on) | |
| Max continuous output current | 7A |
| Max. peak output current | 10A |
| Magnet operating range | 1.0-1.5cm above LED indicator |
| LED indicator | Green ON: active |
| Green OFF: inactive | |
| Power on status | <10 seconds: Previous state restored |
| >10 seconds: Switch enters random state. |
- 1 x MPS010 magnetic switch
- 1 x Activation magnet
- 1 x Manual
- 1 x Location sticker
- Manufacturer : SkyRC
096-SKY600155-01
You will also like
- -5%
Multiplex
Regular price
€72.50
Price
€68.88
Last items in stock
Add to my favorites
Remove from my favorites
x