GLIDER IT DIANA 3 4.5m FS Perfo. Xtralight carbon light 90gr

GLIDER IT is an Italian manufacturer that produces its all-composite gliders in its factory in Poland.
The quality of the products is excellent.
Please note that the kit is delivered without accessories, so you need to provide the PTC plates, servo supports, horns, A/R cable or rods
. The servo covers are included with the kit.

GLIDER IT offers 3 layouts :
- the OD version: Overall Dynamic Layout. The wings are made of hollow fiberglass, with carbon spar. The strength is of course very good.
- the FS version: Fast Slope Layout - The wings are made of hollow fiberglass, with carbon spar and a carbon skin. The strength is excellent. Version for the most "raw" with slope sleeves.
- the PD version: Power Dynamic - The fenders are made of hollow fiberglass, with carbon spar and a double carbon skin. The strength is extreme. This version is rarely available and is offered according to the model.

On all versions, the fuselage is molded in carbon with the front in FDV for a compatibility with the 2.4GHz

Glider_it Diana 3 is our 1:4 scale reproduction of one of the newest and most elegant gliders produced by Diana Sailplanes.

The Glider_it Diana 3 is a complete composite kit, which, like the real one, can also be powered with FES and has a very high degree of prefabrication straight from the factory. The canopy is already glued to the frame, painted and ready to be installed; the wings will only need to glue the horn and mount the servos without any further work.
We will also offer as an option, the ready-to-land fuselage for the retractable landing gear.

Thanks to its HN profile developed directly by us from a Norbert Habe allows a wide speed range.

The flaps and ailerons are already prepared from above and hinged in the mold, the elevator is also pre-articulated in the mold.

The Diana 3 is available in 2 different versions, both made with our Extralight technology:
- FS wings made of fiberglass with carbon spar and a single layer of heavy carbon
- FS Performance wings made of fiberglass with carbon spar and a light HM carbon layer, suitable for lighter conditions.

Technical data

Wingspan: 4.50 m
Wing area: 67 dm2
Fuselage length: 1.60 m
Weight (FS performance carbon light 90gr, glider config): ∼4.9 kg
Weight (FS heavy carbon 160gr, glider config): ∼5.5 kg
Wing loading (FS performance, glider config): 73 g/dm2
Wing profile: Mod. HN

Recommended servos

elevator: 1x KST X10 (installed in the elevator)
fin: 1x KST BLS651 20 mm (or other standard servo)
ailerons: 2x KST X10 10 mm + 2x KST X08
flaps: 2x KST X10 10 mm