The latest generation of 7-channel SMD telemetry receiver in MULTIPLEX 2.4 GHz M-LINKThe right receiver for pilots who don't want to miss out on telemetry even on smaller models! Thanks to the inline connections on the front and rear, the space requirement has been reduced to a minimum. Typical applications: Gliders and motorgliders with a wingspan of up to approx. 2.50 m, small and medium-sized helicopters with a rotor diameter of approx. 1 m, electric and internal combustion engine models with a wingspan of up to approx. 1.60 m, RC cars, RC boats.
Help us to offer you the best price on the product "2.4GHz RX7 M-LINK Multiplex Receiver"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
Telemetry function: Retransmission of the RX voltage and link quality (LQI = Link Quality Indication) from the factory, and possible without connection of external M-LINK sensors
Integrated sensor port for connection of external sensors via MSB (MULTIPLEX Sensor Bus).
Integrated button and LED for: Pairing (Binding), FAIL-SAFE programming, RESET and operating mode info
Can be used in Diversity mode, (two receivers connected to each other), for this purpose the diversity cable (# 8 5070) is required.
Upgradeable via the integrated PC port: With the free PC software MULTIPLEX Launcher* and the USB-PC interface cable (# 85149).
Compatible with MULTImate (# 8 2094).
HOLD/FAIL-SAFE function.
With additional signal amplification for maximum sensitivity and longer range .
Built-in error totalizer/saving of voltage and signal errors.
Technical data:
Number of channels: 7 Type of reception: 2.4 GHz FHSS M-LINK Operating voltage: 3.5 V ... 9.0 V Power supply: 4 - 6 NiXX, 2S LiXX cells Power consumption: approx. 45 mA (without servos) Operating temperature range: - 20°C ... + 55°C Dimensions (L x W x H): approx. 54,0 x 22,5 x 11,5 mm Weight: approx. 13,0 g
New features and technical improvements of the M-LINK receivers: The M-LINK receivers (except for the "light" versions) in version V 1.2x offer the following new possibilities:
1) Servo outputs as composite signal (serial servo transmission - SRXL-MULTIPLEX) The first 12 channels transmitted by the receiver are routed via a 3-wire cable and through the B/D socket of the receiver, e.g.
- PowerBox Cockpit SRS and PowerBox Competition SRS. (Power supply and servo management) from PowerBox Systems - MICROBEAST from BEASTX. - VStabi (VBar) from Mikado Other products based on this principle are under development.
2) Determination of an address for a sensor as "priority address": frequency of data update of this sensor value higher than the others, when many sensors are connected. Example: Variometer
Update your M-LINK receivers at any time! For the update you need: - PC software "MULTIPLEX Launcher" downloadable free of charge at www.multiplex-rc.de - USB PC UNI interface cable (# 8 5149)
The latest generation of 7-channel SMD telemetry receiver in MULTIPLEX 2.4 GHz M-LINKThe right receiver for pilots who don't want to miss out on telemetry even on smaller models! Thanks to the inline connections on the front and rear, the space requirement has been reduced to a minimum. Typical applications: Gliders and motorgliders with a wingspan of up to approx. 2.50 m, small and medium-sized helicopters with a rotor diameter of approx. 1 m, electric and internal combustion engine models with a wingspan of up to approx. 1.60 m, RC cars, RC boats.
.jpg)
Paiement sécurisé
Livraison 24/48h
Paiement 3X
