Imagine a seaplane landing on the water, leaving a perfectly straight line in the sea at sunset.as the season approaches, there are many modelers who can't wait.we have the right model for those who don't have the time to build during this short season (90% completed ARF kit).the SALAGOU, a hull fuselage seaplane was designed for 2 stroke engines of the 46 class. A layer of coating was applied, as a preventive measure, before the canvas was applied to make it watertight.take-offs and landings are easy and perfect for a first experience on the water.the barrels turn well in the axis, which is surprising for a pylon mounted engine, and will satisfy the most enthusiastic. Given the lightness of the airframe, it is possible to motorize it with an XPwer XM4250CA-6 or AXI 2826/10 brushless electric motor, and the fishermen will thank you for it! In this case, the weight at lift-off is 2280g (3S) or 2370g (4S).
Help us to offer you the best price on the product "Seaplane SALAGOU 1,50m ARF"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
Electric motor version: Brushless motor XC4250CA-6 (200g) DUALSKY 60A OPTO controller with UBEC-3A regulator LiPo battery 4000mAh 3S1P (standard flights) or 4000mAh 4S1P (aerobatics) APC E 11x8,5" propeller
Contents of the kit:
Fuselage hull made of balsa-CTP structure, waterproof, shrink-wrapped. V-shaped fuselage underside to allow straight D/L and landings. Engine pylon made of CTP with gelcoated fiberglass engine nacelle. Wings made of balsa-CTP structure, covered with heat-shrink film. Floats in balsa structure, covered with heat-shrink film. Tailplanes in balsa structure, covered with heat-shrink film. Drift "Marine". Accessories (horns, flight controls, clevises, screws, etc. ...). Assembly instructions step by step by image.
Imagine a seaplane landing on the water, leaving a perfectly straight line in the sea at sunset.as the season approaches, there are many modelers who can't wait.we have the right model for those who don't have the time to build during this short season (90% completed ARF kit).the SALAGOU, a hull fuselage seaplane was designed for 2 stroke engines of the 46 class. A layer of coating was applied, as a preventive measure, before the canvas was applied to make it watertight.take-offs and landings are easy and perfect for a first experience on the water.the barrels turn well in the axis, which is surprising for a pylon mounted engine, and will satisfy the most enthusiastic. Given the lightness of the airframe, it is possible to motorize it with an XPwer XM4250CA-6 or AXI 2826/10 brushless electric motor, and the fishermen will thank you for it! In this case, the weight at lift-off is 2280g (3S) or 2370g (4S).
Paiement sécurisé
Livraison 24/48h
Paiement 3X
