FLASH RC, authorized distributor MKS for France offers this elevator / drift servo for glider of very high quality: - digital servo - motor coreless - return to neutral ultra precise - zero play - aluminum housing machined in the mass, for extreme rigidity - chrome gear set - double bearing - locking torque 2.40kg/cm under 6V with speed 0.038sec/60°! set of chrome gears- double bearing- locking torque of 2,40kg/cm under 6,0V with a speed of 0,038sec/60° !- dead band : 0,001ms- Dimensions : 23x12x27.5 mm- weight : 21,21gr.The DS95i is an ultra fast servo designed to be connected on gyroscopes operating in 760µs (does not work on the classic 1520µs outputs of receivers).
Help us to offer you the best price on the product "Digital metal servo DS95i Mks"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
Dead band: 0.001ms (Default) Control System: +Pulse Width Control Working frequence: 760µs / 560hz (RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave Operating Voltage: 4.8~6.0 V DC Volts Operating Temperature Range: -10 to + 60 Degree C Operating Speed (4.8V): 0.047 sec/60° degrees at no load Operating Speed (6V): 0.038 sec/60° degrees at no load Stall Torque (4.8V): 1.92 kg-cm (26.66 oz/in) Stall Torque (6V): 2.40 kg-cm (33.33oz/in) 360° Modifiable: YES Motor Type: Coreless motor Potentiometer Drive: Direct Drive Driver Type: FET Bearing Type: Dual ball bearings Gear Type: Chrome-Titanium alloy gear Programmable: NO Connector Wire Length: 20.0 cm (7.86 in) Dimensions: 23X12X27.25 mm (0.9X0.47X1.07 in) Weight: 21.21 g (0.74 oz)
FLASH RC, authorized distributor MKS for France offers this elevator / drift servo for glider of very high quality: - digital servo - motor coreless - return to neutral ultra precise - zero play - aluminum housing machined in the mass, for extreme rigidity - chrome gear set - double bearing - locking torque 2.40kg/cm under 6V with speed 0.038sec/60°! set of chrome gears- double bearing- locking torque of 2,40kg/cm under 6,0V with a speed of 0,038sec/60° !- dead band : 0,001ms- Dimensions : 23x12x27.5 mm- weight : 21,21gr.The DS95i is an ultra fast servo designed to be connected on gyroscopes operating in 760µs (does not work on the classic 1520µs outputs of receivers).
.jpg)
Paiement sécurisé
Livraison 24/48h
Paiement 3X
