DS6125-E Mks digital metal slimline servo
  • DS6125-E Mks digital metal slimline servo
  • DS6125-E Mks digital metal slimline servo

DS6125-E Mks digital metal slimline servo

FLASH RC, authorized distributor MKS for France offers this servo for elevator of very high quality: - digital servo - return to neutral ultra precise - zero play - aluminum case machined in the mass, for extreme rigidity - set of gears chrome - double bearing - torque blocking of 3.2kg/cm under 6.0V - dead band: 0.001ms - Dimensions: 23x12x27.5 mmThe DS6125-E is recommended for the elevator or drift on gliders type F3F, F3B.
Read more
€65.00
Quantity :
Stock available

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Features :

Dead band: 0.001ms (Default)
Control System: +Pulse Width Control
Working frequence: 1520µs / 333hz
(RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8~6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.15 sec/60° degrees at no load
Operating Speed (6V): 0.12 sec/60° dagrees at no load
Torque (4.8V): 2,6kg/cm
Torque (6V): 3,2kg/cm
Motor Type: DC Motor
Potentiometer Drive: Direct Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Chrome gear
Programmable: NO
Connector Wire Length: 15.0 cm (5.89 in)
Dimensions: 30X10X35.5 mm1811X0.39X1.39 in)
Weight: 28.77 g (1.01 oz)
Destruction of properties: In the 18 ~ 22 kg-cm moment of impact more than three times, the gear will start to slip (push pull at this time there are 3 ~ 5kg/cm); 23 kg-cm instant hit, Gears of collapse.

128-S0015004
  • Thickness in mm (Servos) : 10
  • Torque in kg.cm (servos) : 3.2
  • Speed sec / 60° (servos) : 0.12
  • Pinions (servos) : Metal
  • Bearing (servos) : yes
  • Technology (sevos) : Digital
  • HV (servos) : no
  • Weight in g (servos) : 28.77