PowerBox Smokepump, Standard with accessoriesThe PowerBox Smokepump was developed by PowerBox Systems specifically for pumping smoke oil in model aircraft.The mechanical system and electronics are manufactured in-house, and the quality standard unit is evident from its long effective life: the PowerBox Smokepump is the world's longest lasting smoke oil pump, as has been demonstrated in several long-term tests.The mechanical pump system is assembled entirely of high quality aluminum and brass parts. All of our pumps undergo a break-in procedure during manufacturing, ensuring that the gears mesh perfectly, and that the pump is 100% leak proof. Tight manufacturing tolerances eliminate the need for a separate shut-off valve with the PowerBox Smokepump.The electronic circuitry is infinitely variable in the 0% - 100% range, allowing the driver to adjust the flow rate to meet exact model requirements. The Smokepump can be powered by either a PowerBox or a separate battery. If a separate battery is used, the electronics will go into a "stand-by" mode if the receiver fails to pick up a signal. This means that there is no need to provide a separate switch to isolate the PowerBox Smokepump from the battery when you change the model off.The PowerBox Smokepump is available in a standard version and a later Jet version with a higher flow rate and twin outputs.The maximum flow rate of the Smokepump (Order No. 8010) is about 750 ml./min., While the Smokepump Jet (No. 8015) is capable of about 950 ml. The set includes all necessary connection cables and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect the two silencers of an opposition-twin (boxer) engine.
Help us to offer you the best price on the product "PowerBox Smokepump, Standard with accessories"
To help us improve your experience on our site, we are always interested in hearing from you!
And offering you the best possible price is one of our priorities, so if you find one of our products cheaper elsewhere on a competing European site, please let us know by filling in the form below.
Operating voltage : 4.0V - 9.0V Operating consumption : 1.8 A at 100% Leakage current : 10µA Max flow : 950ml / min Recommended oil : Smoke medium Smokeöl "blue Max" or 3W Smokeöl Dimensions : 79 x 31 mm Weight : 128 gr Operating temperature : -30°C to +75°C
PowerBox Smokepump, Standard with accessoriesThe PowerBox Smokepump was developed by PowerBox Systems specifically for pumping smoke oil in model aircraft.The mechanical system and electronics are manufactured in-house, and the quality standard unit is evident from its long effective life: the PowerBox Smokepump is the world's longest lasting smoke oil pump, as has been demonstrated in several long-term tests.The mechanical pump system is assembled entirely of high quality aluminum and brass parts. All of our pumps undergo a break-in procedure during manufacturing, ensuring that the gears mesh perfectly, and that the pump is 100% leak proof. Tight manufacturing tolerances eliminate the need for a separate shut-off valve with the PowerBox Smokepump.The electronic circuitry is infinitely variable in the 0% - 100% range, allowing the driver to adjust the flow rate to meet exact model requirements. The Smokepump can be powered by either a PowerBox or a separate battery. If a separate battery is used, the electronics will go into a "stand-by" mode if the receiver fails to pick up a signal. This means that there is no need to provide a separate switch to isolate the PowerBox Smokepump from the battery when you change the model off.The PowerBox Smokepump is available in a standard version and a later Jet version with a higher flow rate and twin outputs.The maximum flow rate of the Smokepump (Order No. 8010) is about 750 ml./min., While the Smokepump Jet (No. 8015) is capable of about 950 ml. The set includes all necessary connection cables and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect the two silencers of an opposition-twin (boxer) engine.
