Proxxon Precision lathes FD 150/E

Technical information

Machine base with dovetail guide in extruded aluminum.

Base made of die-cast aluminum. With low-noise special current motor, 2-speed belt drive and additional speed control: For high torque at low speed for large parts and for the right cutting speed even with smaller parts. Relay switch with emergency stop function and restart protection. Precision spindle with 8.5 mm through hole. Chuck for the ER 11 collet standard.

Concentric 3-jaw chuck: inner jaw 1 - 20 mm, outer jaw 20 - 50 mm.

Tailstock made of die-cast aluminum. With pinole and turning tip (MK 0/short adjustment).

Support: can be moved manually on the base and locked with lever. Rotating support for turning 6 x 6 mm steel. Possibility of working by sliding up (60 mm travel) and cross adjustment (40 mm travel). Adjustment of the angle of the upper blade of the rotating cones to + / - 45 °.

Cranks with adjustment to 0 (1 division = 0.05 mm, 1 turn = 1 mm).

Technical data:

230 V. 50/60 Hz. Maximum width 150 mm. Maximum height 55 mm. Top height of the support 33 mm. Sliding transversal displacement (X) 40 mm, upper carriage (Z) 60 mm. Rotating support for turning 6 x 6 mm steel. Spindle bore 8,5 mm. 2 belt speeds with speed control: Speed 1 = 800 - 2.800 rpm. Speed 2 = 1.500 - 5.000 rpm. Dimensions 360 x 150 x 150 mm. Weight approx. 4,5 kg. Built according to class 1.Proxxon Precision lathes FD 150/E