• Out-of-Stock
Charger 208B 350W 18V Icharger
  • Charger 208B 350W 18V Icharger
  • Charger 208B 350W 18V Icharger
  • Charger 208B 350W 18V Icharger

Charger 208B 350W 18V Icharger

If you need a powerful charger with a small footprint, the 208B charger from Icharger is for you! This charger accepts LiPo, Lilo, LiFe, NiCd, NiMh and Lead batteries. It can provide a charge current up to 20A and a power of 350W under a power supply of 18V. The 208B can handle up to 32V DC input.

Read more
€164.90
Quantity :
Out-of-Stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

More details in pictures

Input cord up to 32V DC + mini USB plug

JST-XH 8S balancing ports + temperature sensor socket + charging output

General specifications

  • Up to 8S LiPo, LiIo, LiFe
  • from 1 to 25 NiMh/NiCd cells, from 1 to 18 Pb cells
  • Banana plug cord (up to 25A)
  • Intelligent cooling by a sensor: control of the fan speed
  • Internal temperature protection
  • 10 battery profile memories
  • The iCharger 206B has a 16Mbit flash memory that stores data for 36 hours without power
  • 2x16 LCD display showing: current, voltage, power, capacity, internal resistance, time ...
  • Internal resistance measurement of LiPo batteries/cells
  • Protection against polarity reversal
  • Possibility to update the charger by USB. The "Logview" software can display, analyze the data of the charge or discharge (http://www.logview.info )

Technical specifications

  • Dimensions : 143x97x26 mm
  • Weight: 420g
  • Power supply voltage: 4.5-32 V Dc
  • Max. input current: <25A
  • Max. charge/discharge current: 20A, 20A 20A, 20A
  • Max. charging power 350W at 18V or higher
  • Max. discharge power : 30W
  • Max. regenerative discharge power 350W (DC input becomes an output)
  • Extra" discharge power for LiPo (by adding an external resistor on the "red" wire of the chagrass cord) : 600W @30V/20A
  • Max. balancing current 350mA

Contents of the box

  • 208B charger
  • Alligator clip charging cord
  • 1 temperature sensor
  • 2 alligator clips for the input cord
  • 1 USB cable
  • 1 CDROM containing the manual and the "Logview" software
192-208B
  • Charger source : 12V only
  • Charger power in Watts : 350