Spektrum AR20410T DSMX 20-channel PowerSafe receiver, Telemetry and SYNAPSE module

Spektrum AR20410T 20-channel PowerSafe telemetry receiver features.

• Patented PowerSafe™ redundancy system with two battery input ports and IC3 connectors. Perfect for power-hungry aircraft and high-current servomotor applications consuming up to 35 A (max burst of 50 A)
• Innovative power management system designed with a sleep mode allowing pilots to remotely switch on/off from the transmitter
• Quick-start recovery technology enables the gyro system to be restarted in flight in the event of electrostatic discharge or power failure, giving the pilot control in milliseconds using a stored stabilization calibration
• Regenerative servo support for any number of servos
• Advanced programming for easy adjustments to safety parameters, servo frame rate, AS3X+ parameters and much more
• USB-C port for easy product registration and firmware updates
• 12 V compatible for use with 12 V servo applications (must be activated via advanced programming)
• Integrated battery capacity monitor automatically reports battery capacity used during flight, and can automatically reset when fully charged batteries are installed
• Integrated Black Box telemetry log automatically records all telemetry data when a Micro SD card is installed (Micro SD card not included)
• Integrated status LED provides useful information at start-up, including warnings and mode indicators
• SRXL2 connectivity for easy one-wire connection to supported devices
• Ready to use with Spektrum Smart ESC for single-wire telemetry data without the need for additional modules, links and wires
• Receiver power status, voltage sensor and flight log telemetry data available without the need for additional sensors

• Telemetry data on temperature, cell imbalance, cycles and cell voltage available when using Smart batteries
• When using an SPM4651T receiver, full telemetry is available, with an integrated barometer providing altitude and vario data without the need for additional modules
• The included momentary push-button allows the system to be started or stopped. However, stopping the system requires a specific press and hold action to avoid accidental shutdowns in the event of button failure or disconnection. The switch itself does not need to be replaced; there is a power switch on the receiver itself which can be used instead.
• Rigid rubber grommet mounts and minimalist labeling help keep model set-up organized and clean
• Capable of high-speed frame rates of 11 ms. This can be increased to 5.5 ms, if the servo can handle it, for better stabilization when using Synapse
• Binding is easier than ever, with four options for initiating this process
• Telemetry with integrated ports for rpm, flight pack voltage, temperature sensors and X-bus for telemetry sensor expansion
• Compatible with the new Synapse AS3X+ / SAFE flight stabilization module (SPMAS6000)
• Compatible with all Spektrum DSMX transmitters
• Not compatible with DSM2 AIRMOD JR module (SPMMSJR720)

Features of the Spektrum™ Synapse™ flight stabilization module.

• All-new AS3X+ stabilization algorithm delivers ultimate in-flight performance and feel.
• 20 stabilized outputs with increased sensor accuracy and data throughput
• Thrust vector and "canard" support with Spektrum's new multi-gyroscope system (up to four independent gyroscopic systems in a single unit).
• Intuitive programming makes Synapse the easiest system to configure without the need for external peripherals

• Machined and anodized aluminum housing with three rigid eyelet brackets
• Gyroscopic sensor is isolated to reduce noise and vibration, designed for turbine applications
• New parameters and menus with advanced programming
• Newly designed internal locking cable prevents in-flight disconnection

DESIGNED FOR GIANT SCALE AND TURBINE APPLICATIONS

Spektrum has taken years of customer feedback on the AS3000 and purpose-built the Synapse and AS3X+ algorithm with turbine and giant scale aircraft in mind. We've vastly improved the flying characteristics, designed the system to operate flawlessly in noisy turbine environments and given you 20 stabilized outputs. Now, you can genuinely set your new model's gyro up in less than 5 minutes without a PC, cables or stick position commands. It's so easy, anyone can do it!

NEXT GENERATION IN FLIGHT STABILIZATION

The all-new AS3X+ features a vastly improved stabilization algorithm that has been rigorously tested by experts throughout the hobby. The system is even easier to tune and can be easily optimized for any type of aircraft you fly. Never again spend hours tuning and tweaking until you get your aircraft locked in. We've been able to set up most aircraft in less than 5 minutes including the first flight tuning.

Key AS3X+ improvements include:

• Stop Lock and Release Rate parameters
• Heading Hold improvements
• Improved gryo filtering
• Canard and Thrust Vectoring Support

NOW WITH SAFE

You now have access to our SAFE technology at the flip of a switch which can potentially turn any disastrous situation into a complete recovery. Have the confidence and seconds you need to regroup after an orientation loss or distraction at the field. SAFE can even be selected for the failsafe position with predefined bank and pitch angles. SAFE has saved thousands of aircraft and can potentially save yours.

THRUST VECTOR AND CANARD SUPPORT

Our new multi-gyro system provides support for thrust vectoring and canards. This offers the equivalent functionality of running multiple gyro systems or flight controllers within one system. No additional gyro units needed!

ALUMINUM CASE

The Synapse case is machined aluminum with three grommeted hard mounts for easy installation in most aircraft

ACOUSTIC ISOLATION

Synapse's gyro sensor is encased in a sound and vibration reduction insulation designed for turbine applications. While other systems require third-party sound damping, we've designed Synapse to work flawlessly in most turbine applications.

LOCKING SENSOR CABLE

Synapse's sensor cable is now designed with a locking connector on the RX side and the sensor side is internally mounted inside Synapse. This ensures that your synapse remains connected to your receiver regardless of in-flight vibrations.

SLEEP MODE

The AR20410T receiver features an advanced power management system designed with sleep mode allowing pilots to remotely power on/off from the transmitter. This exciting new feature allows you to power up your model's electronic system at the press of a button. No hatch removal or physical switches are needed, and it is extremely convenient for a day at the flying field.

FAST BOOT RECOVERY

The AR20410T PowerSafe receiver features innovative Fast Boot technology that allows the Synapse system to reboot in flight upon power interruption. The technology skips various start-up checks and provides the pilot control instantly using a saved stabilization calibration.

"BLACK BOX" TELEMETRY LOGGING

When a micro-SD card is inserted into the receiver, flight information will be logged for later retrieval. This includes flight log data, battery status and other important telemetry stored over time. This can be helpful for diagnosis performance.

Black Box captures the following data:

holds, frames, fades_0, fades_1, fades_2, fades_3, rssi_dBm, rssi_Pct, fp_volt, rpm_us, rxVoltage, currentA, currentB, voltsA, voltsB, chargeUsedA, chargeUsedB, tempF, altitudeFt, tempC, altitudeM

12 Volt and Regenerative Servo Support

The AR20410T Supports 12v servo operation and can handle any number of regenerative servos. A huge leap forward in support for future technology improvements in the servo world.

SRXL2 SUPPORT

Easily connects and communicates with any of Spektrum's SRXL2 products such as the Spektrum SKY and our Smart ESCs. Additionally, some third party sensors and modules will use SRXL2.

USB C UPDATING AND REGISTRATION

Easily download, install updates and register your receiver on our Spektrum community website. Special cables are no longer required!

MOMENTARY PUSHBUTTON

The included momentary pushbutton is designed to be installed in your aircraft to allow booting and shutting down the system. With a unique press and hold pattern, accidental shutdowns are extremely unlikely. Additionally, the AR20410T receiver has its own power switch that can be used instead.

FOUR BINDING OPTIONS

Binding is easier than ever with four ways to initiate the binding process. Bind button, Forward Programming, use of a bind plug and remote receiver button.

Product Specifications