Charger D100 V2 1-6S 2x100W 12V/220V SKYRC
  • Charger D100 V2 1-6S 2x100W 12V/220V SKYRC
  • Charger D100 V2 1-6S 2x100W 12V/220V SKYRC

Charger D100 V2 1-6S 2x100W 12V/220V SKYRC

The D100 V2 SKY RC charger accepts all types of batteries: Nixx, Lixx and Pb, including the new generation of LiHV battery. It is able to charge (or discharge) Lixx batteries from 1 to 6S or Nixx from 1-15 cells at a maximum current of 10A. The D100 has two independent outputs that can deliver up to 100W of charging power each if you use a 12V source to power the charger. If you decide to connect the D100 to the mains, the integrated power supply can provide a maximum power of 100W, a power distribution system allows to assign 0 to 100W max for output A and the difference for output B.
Read more
Quantity :
Stock available

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Technical characteristics

* Two independent outlets

D100 skyrc

* Optimal ventilation

D100 Skyrc

* Monitoring of the battery charge and firmware update

D100 skyrc

Thanks to the software "Charge Master" downloadable for free, you can monitor the evolution of the state of your batteries during the charge. In particular, you can visualize the pack voltage, the voltage of each cell, and thus data in real time and also in the form of graphs. The software is also used to perform updates of the charger's firmware.

* Power distribution system in AC mode

D100 skyrc

In AC mode (using mains power), you can adjust the power distribution (100W) between the two outputs yourself.

* Control the charger and monitor the charge with your smartphone

Bluetooth 4.0 connectivity allows you to remotely control and monitor the D100 v2 conveniently from an app on an IOS or Android smartphone. The app can be downloaded from iTunes Store, or Google Play. The use of the application is identical on both platforms and is self-explanatory. No need for specific pairing, just activate Bluetooth and launch the application. The connection is established automatically.

* Specifications

  • Voltmeter without charging
  • Measure internal resistance of batteries
  • Input voltage: 100-240V AC / 11-18V DC
  • Max. charging power 2x100W (with 12V source), 100W to be shared between the two outputs (with integrated power supply)
  • Max. discharge power 2x10W
  • Charging current: 0.1-1.0A, 1.1A - 10A
  • Discharge current: 0.1 - 5A
  • Balancing current: 200mA
  • LiPo/LiFe/LiIon/LiHV batteries: 1-6S
  • NiCd/NiMh batteries: 1-15 cells
  • Lead batteries: 2-20V
  • Dimensions: 148x13x62mm
  • Weight : 780g

D100 skyrc

Contents of the box

D100 sky rc

  • D100 Sky RC Charger
  • 1x power cord
  • 2x XT60 charging cords
  • 2x bare wire charging cords
  • 2x balance board JST-XH
  • Charger source : 12V and 220V/Sector
  • Charger power in Watts : 100