Robbe Cyclone XT ARF 6,20m motorglider
  • Robbe Cyclone XT ARF 6,20m motorglider
  • Robbe Cyclone XT ARF 6,20m motorglider
  • Robbe Cyclone XT ARF 6,20m motorglider
  • Robbe Cyclone XT ARF 6,20m motorglider

Robbe Cyclone XT ARF 6,20m motorglider

The CYCLONE XT is the further development of its predecessor CYCLONE. With an incredible wingspan of 6.20 m, it is the giant in the electric glider sky! The epithet XT stands for "Extended". The model has a GRP painted fuselage and two two-piece wings with Abachi planks and GRP underlay. Its new LS 6330-15 brushless motor is designed for 8S LiPo operation for powerful climbs and easy launch cart takeoff.The outer surface design, surface electrical coupling using MPX connectors in the mounting frames and the new LS 6330-15 long shaft drive motor are the main features of the new Cyclone XT, along with the increased wing span. The canopy latch has been moved aft under the wing/fuselage molding, as is typical for larger glider models.The QG/W profile has been retained. It extends from a QG/W-2.5/12 at the root to a QG/W-2.5/11 in the center and ends at the winglet with a QG/W-3/10.5. This is an excellent way to do extended thermal flights, as this is the job of the CYCLONE XT. The flight characteristics are as usual good and quiet.ARF version (kit only, without equipment) . Instructions in English/German
Read more
€999.00
Quantity :
Stock available

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Features:

Two-piece fuselage made of GFK/Kevlar reinforced with CFK.
Fully abachi-coated wings for high pressure resistance
Pre-covered with ORACOVER®.
Four-part wing, separable
Plug-in wings with MPX connectors in the mounting frame for electrical connection (PNP version only)
Solid round steel connectors of 14x500 mm for the inner surfaces, carbon connectors of 12x375 mm for the outer wings
Central surface on the upper side fully covered with a 200 g carbon mat, bottom side covered with 80 g glass mat
Outer surfaces completely covered with 80 g glass mat
New canopy lock under the wing
High-quality M3 connection accessories made in Germany
Stable elevator connection with 5/3 mm CFK tube and M3 clevises
Reinforced tail construction
Continuous sandwich spar (carbon-pin-carbon) for rigiditypine-carbon) for maximum bending rigidity
Precision-mounted anti-torsion devices in all parts of the wing
High degree of prefabrication

Technical data

Recommended battery: 8S/5000-7000mAh LiXX
Wings: Styro/Glass/Abachi
Order: H,S,Q,M,WK
Wingspan (mm): 6200
Manufacturer: Robbe
Fuselage: GfK/CfK
Delivered: PNP PLUG N PLAY
Recommended motor: Ro-Power Torque LS 6330-15
Required construction level: Intermediate
Required flight level: Profi
Flight weight approx. (g): 11400
Profile: HQW
Propulsion set: Electric

Scope of delivery

Model CYCLONE XT largely prefabricated
Two-part fuselage made of GFK/Kevlar CFK reinforced
Wings made of Abachi, reinforced with GRP/CfK
Ready to be covered with ORACOVER
Assembly instructions in German/English/French

232-2665
  • Span in meters : 6,20
  • Type of aircraft kit : Kit to equip
  • Material : Fiber / Composite