Futaba S3270SVi MG HV SBUS2 Micro Servo (16.2g, 3.0kg/cm)
  • Futaba S3270SVi MG HV SBUS2 Micro Servo (16.2g, 3.0kg/cm)
  • Futaba S3270SVi MG HV SBUS2 Micro Servo (16.2g, 3.0kg/cm)
  • Futaba S3270SVi MG HV SBUS2 Micro Servo (16.2g, 3.0kg/cm)

Futaba S3270SVi MG HV SBUS2 Micro Servo (16.2g, 3.0kg/cm)

Mini S3270SVi digital servo SBUS2 HV (high voltage) metal gears, dual bearings, I connector.

This robust servo is ideal for glider wings, elevator for F3As, cyclic or tail for 450 class helicopters. This servo can be connected to the SBUS 2 port of Fasstest receivers or the SBUS port of Fasst and Fasstest receivers. Like all SBUS and SBUS2 servos, it can also operate on a traditional PWM channel. The following functions can be programmed by software: Direction of rotation, rotation mode (normal or retracted train), faster or slower start, rotation speed, limit switch, neutral position ...

Read more
€47.42
Quantity :
Stock available

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Technical specifications

  • Dimensions: 23X11.8X28.8 mm
  • Weight : 16.2g
  • Power supply voltage : 6.0 - 7.4V
  • Torque : 2.3Kg.cm under 6.6V, 3.0Kg.cm under 7.4V
  • Speed : 0.1 sec/60° under 6.6V, 0.082 sec/60° under 7.4V
  • Double bearing
  • Digital SBUS2
  • Programmable

Linkage by I-connector

This servo is equipped with a "ZH" or "I connector" (small white plug) allowing to link in series two, three ... servos. This process is practical for example for a wing with two ailerons and a flap (3 servos). The three servos are connected in series by two ZH extensions, then the last servo is connected in SBUS to the receiver. In this way, the three pieces of information (aileron1, aileron2 and flap) pass through a single wire.

066-01000795
  • Thickness in mm (Servos) : 384