• Out-of-Stock
Futaba BLS173SVi MG HV Brushless SBUS2 Mini Servo (28g, 7.6kg/cm)

Futaba BLS173SVi MG HV Brushless SBUS2 Mini Servo (28g, 7.6kg/cm)

BLS173SVi brushless digital servo SBUS2 HV (high voltage) FUTABA, metal gears, double bearings.this robust servo is ideal for gliders and swashplate of 500/600 helicopters, but it can also be used for other applications. This servo can be connected to the SBUS 2 port on Fasstest receivers or the SBUS port on Fasst and Fasstest receivers. Like all SBUS and SBUS2 servos, it can also operate on a traditional PWM channel. The following functions can be programmed by software: Direction of rotation, rotation mode (normal or retracted train), faster or slower start, rotation speed, limit switch, neutral position ...
Read more
€139.90
Quantity :
Out-of-Stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Technical specifications

  • Dimensions: 33x15x27.1 mm
  • Weight: 28g
  • Power supply voltage : 6.0 - 7.4V
  • Torque : 6.8Kg.cm under 6.6V, 7.6Kg.cm under 7.4V
  • Speed : 0.11 sec/60° under 6.6V, 0.10 sec/60° under 7.4V
  • Metal sprockets
  • Double bearing
  • Digital SBUS2
  • Programmable

I-connector linkage

This servo is equipped with a "ZH" or "I connector" (small white plug) allowing to link in series two, three ... servos. This process is practical for example for a wing with two ailerons and a flap (3 servos). The three servos are connected in series by two ZH extensions, then the last servo is connected in SBUS to the receiver. In this way, the three pieces of information (aileron1, aileron2 and flap) pass through a single wire.

066-01000794
  • Thickness in mm (Servos) : 15
  • Torque in kg.cm (servos) : 7.6
  • Speed sec / 60° (servos) : 0.10
  • Pinions (servos) : Metal
  • Bearing (servos) : yes
  • Technology (sevos) : Digital
  • HV (servos) : yes
  • Weight in g (servos) : 28