• Out-of-Stock
Super Boards ep:5,0 mm (100x30cm) - set of 6 pcs
  • Super Boards ep:5,0 mm (100x30cm) - set of 6 pcs
  • Super Boards ep:5,0 mm (100x30cm) - set of 6 pcs
  • Super Boards ep:5,0 mm (100x30cm) - set of 6 pcs
  • Super Boards ep:5,0 mm (100x30cm) - set of 6 pcs

Super Boards ep:5,0 mm (100x30cm) - set of 6 pcs

The new Vector Boards from Graupner give you the opportunity to develop and build your own models according to your wishes.Whether it is a glider, a remote-controlled aircraft model, a vehicle model or a stationary model, the Vector Board is very versatile.Graupner Vector Board is more robust and tear-resistant than EPP and will also be used in the future on Vector Line models.Application examples can be found on the respective Vector Boards highlights.
Read more
€26.95
Quantity :
Out-of-Stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison 24/48h Livraison 24/48h
  • Paiement 3X Paiement 3X
Cheaper elsewhere?

Go ahead and build your glider model, download a 3 page view from the internet. Print them out and place them on the Vector Boards. Now just cut it out, put in the trim weight, (can be a 1 or 2 cent coin), paint and your own throw glider is ready to fly.
Print the same view enlarged, so that the model's wing corresponds approximately to the total area of an A4 paper and experiment with the Vector unit.

Graupner's Vector Board, with a thickness of 0.2 to 2 mm, is ideal for model aircraft weighing less than 30 g. The material can be used to produce wings, hulls and tailplanes. The material can be used to make ornaments, e.g. for non-structural parts or cockpit parts. It is very well suited for making thermoforming models.

Material surface

We decided to make the material of the Vector Board as light as possible, as it is largely about flying. Since the Vector Board material is molded into the block and then divided into different thicknesses, the surface of the Vector Board may look slightly different depending on the thickness.
Casting creates a kind of ice crystal with ridges in the surface.

Characteristics:

  • Easy
  • Very robust
  • Open pore
  • Foldable
  • Tear resistant (except for sharp cuts)

Processing:

Vector Board can be cut with milling cutter, laser, hot wire or knife or sawed with jigsaw (jigsaw with fine blade).
You can glue Vector Board with UHU por, hot glue or superglue.
You can paint it with markers, pencils, acrylic paints, universal paints, watercolors, digital printing.
If you want, you can also draw in depth the Vector Board to create more elaborate shapes. With the hot air blower, simple shapes can be folded

292-C9390